hello everyone was wondering if anyone has a definition file to read a bin from a come racing 355 chip that is in a vs ute but running a vn manual computer?
i will post the bin
<attachment removed>
come 355 chip
-
jezza351
- Posts: 116
- Joined: Fri May 22, 2009 8:49 am
- cars: vr ss comodooree
-
vn5000
- Posts: 551
- Joined: Fri Jul 17, 2009 4:11 am
- cars: vn v8 commodore
- Location: GOLD COAST QLD
Re: come 355 chip
Ive never seen a 16 k write enabled bin with h/speed aldl before .
You will have to make your own xdf which is not to hard to do with these bins as they are based on a factory bin , just bigger/extra tables mixed around and write enabled,apparently made by kalmaker for come.
There was a few come bins posted not long ago that were based on $83 that i made an xdf for ,just took a couple of hours.
You will have to make your own xdf which is not to hard to do with these bins as they are based on a factory bin , just bigger/extra tables mixed around and write enabled,apparently made by kalmaker for come.
There was a few come bins posted not long ago that were based on $83 that i made an xdf for ,just took a couple of hours.
-
jezza351
- Posts: 116
- Joined: Fri May 22, 2009 8:49 am
- cars: vr ss comodooree
Re: come 355 chip
ok may have stuffed up the read here is the new file
<attachment removed>
<attachment removed>
-
vn5000
- Posts: 551
- Joined: Fri Jul 17, 2009 4:11 am
- cars: vn v8 commodore
- Location: GOLD COAST QLD
Re: come 355 chip
No you read it correctly ,its only a 16k bin.
You may as well use $12p though, It has everything and more than this bin has,and a very well defined xdf.
You may as well use $12p though, It has everything and more than this bin has,and a very well defined xdf.
-
vn5000
- Posts: 551
- Joined: Fri Jul 17, 2009 4:11 am
- cars: vn v8 commodore
- Location: GOLD COAST QLD
Re: come 355 chip
If you want to make an xdf for this bin it is very similar to baya $db bin , and to make an adx start with $12 adx ,it will connect but you just have to swap byte /bit offsets a bit.
-
vnsswithcam
- Posts: 79
- Joined: Sat Mar 20, 2010 3:20 am
- cars: vt ss commodore
- Location: penrith n.s.w
Re: come 355 chip
im in the same boat ive got a couple of those tunes laying around and i cant work them out the offsets etc? i really thought someone on this site would have hacked them already and posted up the xdf somewhere but i cant find one so if anyone does have any type of xdf for these tunes send one my way 
one point twenty one jiggawatts!!!! great scott!!!
-
Holden202T
- Posts: 10435
- Joined: Sat Feb 28, 2009 11:05 am
- Location: Tenambit, NSW
Re: come 355 chip
not much happens with these sorts of things because they are limited .... so normally we just look through them, find ve tables and spark and stuff like that and put it into $12P and use that etc.
also, unless the tune has an engine to go with it its never going to be perfect so its sometimes easier to start from scratch and make your own tune.
also, unless the tune has an engine to go with it its never going to be perfect so its sometimes easier to start from scratch and make your own tune.
No matter what the question is, the answer is always more horsepower! 
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread

Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
-
Doctor Bob
- Posts: 195
- Joined: Mon Mar 02, 2009 12:58 pm
- cars: VN, VT
- Location: Melbourne Vic.
Re: come 355 chip
not to mention the copyright message in the file...
-
vn5000
- Posts: 551
- Joined: Fri Jul 17, 2009 4:11 am
- cars: vn v8 commodore
- Location: GOLD COAST QLD
Re: come 355 chip
Ive nearly finished an xdf for this bin and i dont know how they can claim any sort of copywrite for these bins as they are almost identical to the factory bins , this ones a baya bin just mixed around ,a couple of extra tables ,some removed,h/speed aldl and write enabled.If anything there breaching copywrite by copying sections of factory bins . 
-
Holden202T
- Posts: 10435
- Joined: Sat Feb 28, 2009 11:05 am
- Location: Tenambit, NSW
Re: come 355 chip
im not suprised really .... alot of times people just put bigger injectors in or get some more spark put in it for a bit better performance
No matter what the question is, the answer is always more horsepower! 
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread

Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread