Hi all,
This images are of an ECU from an N13 Nissan Pulsar (1987 to 1990).
I'm looking for information it.
Can anyone assist.
Thanks in advance
Looking for Info
-
Handy Andy
- Posts: 8
- Joined: Tue May 10, 2022 4:37 am
- cars: VX Commodore
Looking for Info
You do not have the required permissions to view the files attached to this post.
-
Charlescrown
- Posts: 2076
- Joined: Fri Aug 05, 2011 9:58 pm
- cars: V8 VR Commodore BT1
LB Lancer 2L turbo & Delco
Starion TBI with Delco
Mitsubishi Lancer EVO4 track car
NA MX5
3 vintage motor bikes - Location: Padstow NSW
Re: Looking for Info
Yea it's an 808 with a 4 cyl 1.8 PFI memcal.
-
Handy Andy
- Posts: 8
- Joined: Tue May 10, 2022 4:37 am
- cars: VX Commodore
Re: Looking for Info
Thanks for thatCharlescrown wrote:Yea it's an 808 with a 4 cyl 1.8 PFI memcal.
My background is Electronics, not cars.
Sometimes these cross my workbench.
-
charlay86
- Posts: 586
- Joined: Thu Sep 17, 2009 4:00 am
- cars: VT S1 SS (L67)
- Location: Perth, WA
Re: Looking for Info
These were also fitted to Holden commodores of the same era.
We have a suite of custom software ("OSE 12P") and various tools and hardware available here (pcmhacking.net) to tune these ECMs and/or adapt then for other vehicles. That hardware is probably the main reason these forums exist.
We have a suite of custom software ("OSE 12P") and various tools and hardware available here (pcmhacking.net) to tune these ECMs and/or adapt then for other vehicles. That hardware is probably the main reason these forums exist.
-
Handy Andy
- Posts: 8
- Joined: Tue May 10, 2022 4:37 am
- cars: VX Commodore
Re: Looking for Info
I've wandered around the forums a bit, found out a lot. Thanks.charlay86 wrote:These were also fitted to Holden commodores of the same era.
We have a suite of custom software ("OSE 12P") and various tools and hardware available here (pcmhacking.net) to tune these ECMs and/or adapt then for other vehicles. That hardware is probably the main reason these forums exist.