ALDL LCD Display
-
- Posts: 492
- Joined: Fri Mar 04, 2016 10:35 am
- cars: R33 GTST, '60 Vw Bug, Express (4G63T), GW X200
- Location: Windellama, NSW
- Contact:
Re: ALDL LCD Display
PCB's arrived at a friends place up in QLD, he's express posted them here, should get them tomorrow.
DHL charges an extra $35 as we're in a 'remote' region so its cheaper to ship to a capital city and forward on.
DHL charges an extra $35 as we're in a 'remote' region so its cheaper to ship to a capital city and forward on.
Re: ALDL LCD Display
Nice nice
Keep us updated
Keep us updated
-
- Posts: 492
- Joined: Fri Mar 04, 2016 10:35 am
- cars: R33 GTST, '60 Vw Bug, Express (4G63T), GW X200
- Location: Windellama, NSW
- Contact:
Re: ALDL LCD Display
I'm thinking instead of autodetect code for 11p, 12p, stock etc, I'll rely on a config file on the SD card. It'll contain the TX string, the RX expected length and offsets for each value you want to read as well as where to place it on the screen, thresholds for colors etc. I think this will make it suitable for the largest range of applications?
We can upload our config files here for the most general use of the display for those that can't be bothered creating their own
We can upload our config files here for the most general use of the display for those that can't be bothered creating their own
Re: ALDL LCD Display
Sounds good. Will there be a guide on how to setup your own config for screen layout etc?
Any luck with getting this to run of the obd port on vr vvs commodores yet? I don't need logging just want to use as a display.
Any luck with getting this to run of the obd port on vr vvs commodores yet? I don't need logging just want to use as a display.
-
- Posts: 492
- Joined: Fri Mar 04, 2016 10:35 am
- cars: R33 GTST, '60 Vw Bug, Express (4G63T), GW X200
- Location: Windellama, NSW
- Contact:
Re: ALDL LCD Display
I'll write up a config guide once I get the code up and running. If there's anyone here interested in helping develop the code, please pm me.
One wire should be fine but I don't have a vs or VR here, only a VP and a handful of pulsars which all don't have the 8192 chip which I think yours does? Either way the protocol is the same so I don't expect any issues.
Re: ALDL LCD Display
Looking good send us pm when all done.
Sorry about all the questions but will it have dimming of display for night time when driving ?
Sorry about all the questions but will it have dimming of display for night time when driving ?
Re: ALDL LCD Display
Happy to be a test mule for a VS with NVRAM
-
- Posts: 492
- Joined: Fri Mar 04, 2016 10:35 am
- cars: R33 GTST, '60 Vw Bug, Express (4G63T), GW X200
- Location: Windellama, NSW
- Contact:
Re: ALDL LCD Display
Yes, it has a dimming pin you can connect a dash light to or parkers to set a lower level, configured in the config file too (high and low brightness levels)
Tried joining TX and RX together and connecting it over 1 wire to the ecu, worked fine so i think VS will be fine too
Tried joining TX and RX together and connecting it over 1 wire to the ecu, worked fine so i think VS will be fine too
Re: ALDL LCD Display
Sounds good cant wait for mine
got rough dimensions on the 2 inch screen hoping for it to replace my mechanical boost gauge as seen below. Never know maybe able to go larger than 2 inch screen
got rough dimensions on the 2 inch screen hoping for it to replace my mechanical boost gauge as seen below. Never know maybe able to go larger than 2 inch screen
- Attachments
-
- 298007870_629714698906485_2074806115415184359_n.jpg (89.99 KiB) Viewed 2555 times
-
- 297686207_1526553197763962_1754389333431733253_n.jpg (97.95 KiB) Viewed 2555 times
-
- Posts: 492
- Joined: Fri Mar 04, 2016 10:35 am
- cars: R33 GTST, '60 Vw Bug, Express (4G63T), GW X200
- Location: Windellama, NSW
- Contact:
Re: ALDL LCD Display
I'll need to grab the Vernier's to confirm though it looks a little wide for a 52mm pod. Would fit in that space you have behind it beautifully with a 3d printed frame