vr v6 drama after turning vats off?? help

[vnsswithcam]

hi guys my mate has put a vr v6 motor in a corrolla? and hes asked me to turn off the vats for him so ive read his memcal correct me if im wrong but i read it as a 27c512 eprom? but ive used a 11 xdf and it all lined up where its suppost to so i continued to turn off vats ? erased then reprogrammed using 27c512 on willem and then when we tried to use the memcal it keeps coming up with memcal codes?? so i checked the checksum and im finding it says 17 not 11 i thought that was strange so i bypassed the checksum with the AA trick then it now says 0.00????? i dont understand whats happening also the memcal still doesnt work any one know whats going on or have i stuffed something up ive attatched it so yous can look at it
cheers

[Holden202T]

change the program id settings to display as hex instead of floating point.

or alternatively i think if you change the setting from 17 to 170 that should be AA

option 3, edit it in a hex editor and change it from 11 to AA .....

i think you've done the right think, just a dodgy xdf issue i'd say.

[darcy]

I think 202 has it.

Your XDF is likely set to floating point, not Hex.

[Holden202T]

yeah well when i opened the file with a 11.xdf i have it was saying 17 but when viewing the file in hex editor 6008 was 11 so i changed it to AA and the loaded in xdf and the result was 170 .....

[vnsswithcam]

thanks 202 i think thats all its going to be im going to test it tonight changed it to hex instead of floating point and its looking like its suppost too when i change it to AA..... also how many $11 xdf's are there? ive got 3 and only one seems to line up correctly and thats the one im using for this tune can i just save it as hex in that parameter only or will it stuff up something else...

[Holden202T]

yeah just save the xdf with the hex setting and it will be right.

VL400 is working on a $11 OSE code and when thats sorted out there will be an xdf for it similar to the $12 one but until that time its really just whatever you can find out there.

the $11 xdf i have is called 16176424_$11_VR_auto.xdf and it had the dodgy setting for program ID word.

[Jayme]

dont forget vl400's $11 xdf. https://pcmhacking.net/forums/viewtopic.php?f=7&t=634
it is supposed to work with variants 3,4,and 5, which includes this bin you are working on. you will never find a more fully featured $11 XDF

[vnsswithcam]

just checked the 11b xdf and awsome stuff heaps heaps better defined

[vnsswithcam]

just tested the tune in the vr and worked a treat thanks again guys for all your help

[Holden202T]

no problems!