Looking at getting a generic GM style 3 bar map sensor to log vacuum and boost pressure on a VY L67.
Will also be wiring a wideband into it as well for logging purposes on the Youtube build series I am doing.
Have searched for a fair while and cannot find any information on the calibration data to enter into the ADX for a map sensor, is any one able to help me out with the please?
Cheers!
RKGarage
Map Sensor ADX Calibration
-
Rhysk94
- Posts: 235
- Joined: Sun Mar 15, 2020 9:25 am
- cars: VE SS-V
VY V6 Turbo “Ecojet”
FG XR6 Turbo
VY V6 Stocker Farm Hack
VY V6 Turbo Competition Drift Car
VY V6 L67 Seat Time Drift Car
N80 Toyota Hilux
VZ SS - Location: Perth
-
antus
- Site Admin
- Posts: 10014
- Joined: Sat Feb 28, 2009 10:34 am
- cars: TX Gemini 2L Twincam 8psi
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Subaru WRX 2007
Re: Map Sensor ADX Calibration
Look for information in a datasheet for the map sensor itself. For example https://www.robietherobot.com/storm/mapsensor.htm
Its a voltage conversion so once you have pressure and voltage, you can figure out an equation.
Its a voltage conversion so once you have pressure and voltage, you can figure out an equation.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396