need vy getrag XDF file

[dta421ocs]

hello everyone, I am after anyone who can help me out with getting the VY getrag XDF file so i can flash it to my ecu please.

[antus]

What computer? V6 flash pcm, or an ls1 type? If the latter, what operating system?

[Wade]

Vy getrag I’d assume v6 flash pcm. Should be able to use my xdf for all the trans stuff no problems. Just load up enhanced bin file and then a manual tune file and do a compair. Swap changes over. I think there is actually a lot of changes from auto to manual.

[dta421ocs]

thanks for the reply guys, it is a flash pcm for v6 vy. Wade i end up flashing the1's enhanced file on it but can i get a link to your enhanced bin file so i can grab the manual tune file, im only new to this sort of stuff and just need abit of guidance of how to get the bin files.

[dta421ocs]

update.... i flashed in the VY_V6_Enhanced_v1.2 bin file but need a manual tune file to see what needs changing. Getrag VSS is enabled, Vehicle speed sensor A/T no signal enabled, manual transmission enabled, Vats is disabled too. Just need to know what else needs doing and a manual file to compair with.

[Wade]

There should be all the standard bin files on here to download. Just grab a stock manual bin files on load the enhanced bin up in tunerpro and then load a standard manual bin file so you can compare. That’ll show you all the difference and what needs to be changed

[Wade]

It’s actually something I’m sure one of us can do. And see if The1 is willing to add it into the main files. Having the enhanced auto and manual bin files would save some a bit of time. I’ll look into it

[dta421ocs]

thanks heaps for the info and will have a look tonight

[Wade]

Here's a VX-VY Enhanced bin with all the manual changes. If you use it plz let us know how it goes.

[dta421ocs]

thanks Wade really appreciate the help