00-05 Buck Lesabre Instrument Cluster

[rjdrew1986]

I know this is off the beaten path of this PCMH forum, but I thought I'd throw this question out there in case anyone can shed any light. I've posted the question on the IPCH FB group, one response indicated that it's either the interface (I'm using the MDI that has always worked fine with PCMH) or IPCH doesn't work with the 00-05 Buick Lesabre cluster.

On any of the several 00-05 Buick LeSabre clusters, after pressing read properties in IPCH, the VIN reads flawlessly but the subsequent queries all fail. The Debug Log is below.

[12:32:06:671] IPC HAMMER 016.9
[12:32:06:679] Initializing J2534 Device
[12:32:06:690] Loaded DLL
[12:32:06:779] Connected to the device.
[12:32:06:782] Battery Voltage is: 12.064
[12:32:06:808] Protocol Set
[12:32:06:824] Device initialization complete.
[12:32:06:648] Loading credits.html from embedded resource.
[12:32:06:648] Loading start.txt from embedded resource.
[12:32:06:648] Loading help.html from embedded resource.
[12:32:06:919] Thanks for using IPC Hammer.
[12:32:15:020] Suppressing VPW chatter.
[12:32:15:023] TX: 6C FE F0 28 00
[12:32:15:035] Sending 'test device present' notification.
[12:32:15:035] TX: 8C FE F0 3F
[12:32:15:047] RX: 6C F0 60 68 00
[12:32:15:050] Ignoring chatter: 6C F0 60 68 00
[12:32:18:050] ReadMsgs OBDError: ERR_BUFFER_EMPTY
[12:32:18:161] TX: 6C 60 F0 3C 01
[12:32:18:185] RX: 6C F0 60 7C 01 00 31 47 34 48 50
[12:32:18:185] TX: 6C 60 F0 3C 02
[12:32:18:209] RX: 6C F0 60 7C 02 35 34 4B 32 31 34
[12:32:18:209] TX: 6C 60 F0 3C 03
[12:32:18:232] RX: 6C F0 60 7C 03 31 39 35 38 34 31
[12:32:18:234] VIN: 1G4HP54K214195841
[12:32:18:240] TX: 6C 60 F0 3C 0A
[12:32:18:261] RX: 6C F0 60 7F 3C 0A 31
[12:32:18:262] Received an unexpected response. Attempt #1, status Error.
[12:32:21:264] ReadMsgs OBDError: ERR_BUFFER_EMPTY
[12:32:21:267] Sending 'test device present' notification.
[12:32:21:268] TX: 8C FE F0 3F
[12:32:24:277] ReadMsgs OBDError: ERR_BUFFER_EMPTY
[12:32:24:279] Sending 'test device present' notification.
[12:32:24:280] TX: 8C FE F0 3F
[12:32:36:371] ReadMsgs OBDError: ERR_BUFFER_EMPTY
[12:32:36:373] Sending 'test device present' notification.
[12:32:36:375] TX: 8C FE F0 3F
[12:32:36:376] ReadMsgs OBDError: ERR_DEVICE_NOT_CONNECTED
[12:32:36:378] Sending 'test device present' notification.
[12:32:36:378] TX: 8C FE F0 3F
[12:32:36:379] ReadMsgs OBDError: ERR_DEVICE_NOT_CONNECTED
[12:32:36:379] Receive timed out. Attempt #6, Timeout #5.
[12:32:36:380] TX: 6C 60 F0 3C 0A
[12:32:36:380] Send failed. Attempt #2
[12:32:36:381] OS ID query failed: Error
[12:32:36:388] TX: 6C 60 F0 3C 0B
[12:32:36:389] Send failed. Attempt #1
[12:32:36:389] TX: 6C 60 F0 3C 0B
[12:32:36:390] Send failed. Attempt #2
[12:32:36:390] Calibration ID query failed: Error
[12:32:36:393] TX: 6C 60 F0 3C 08
[12:32:36:393] Send failed. Attempt #1
[12:32:36:393] TX: 6C 60 F0 3C 08
[12:32:36:394] Send failed. Attempt #2
[12:32:36:394] Hardware ID query failed: Error
[12:32:36:395] Unknown
[12:32:36:403] TX: 6C 60 F0 3C 05
[12:32:36:403] Serial Number query failed: Timeout
[12:32:36:409] TX: 6C 60 F0 3C 14
[12:32:36:409] Send failed. Attempt #1
[12:32:36:410] TX: 6C 60 F0 3C 14
[12:32:36:410] Send failed. Attempt #2
[12:32:36:410] BCC query failed: Error
[12:32:36:414] TX: 6C 60 F0 3C A0
[12:32:36:414] Send failed. Attempt #1
[12:32:36:414] TX: 6C 60 F0 3C A0
[12:32:36:415] Send failed. Attempt #2
[12:32:36:415] MEC query failed: Error