Hi Guys & Gals, As in the subject heading the issue is that randomly the VATS light on the dash starts flashing and the engine gets a bad miss which feels more like a very quick total engine shutdown and restart and then sometimes total shutdown. If I remove the ground cable over night the issue is gone until the next time the VATS light starts flashing again. I have "The1's" Enhanced tune which already has the VATS removed and runs and shifts great except when the VATS light rears it's head. Any pointers would be appreciated. I have checked all the grounds and installed a new CAS.
Cheers.
Rossi.
VY V6 Flashed ECU runs great until VATS Light starts flashing
-
rossi1959
- Posts: 1
- Joined: Tue Jun 01, 2021 10:00 am
- cars: LN 106 Hilux with LS1/4l60
VY V6 4l60e UTE - Location: Moranbah QLD
-
antus
- Site Admin
- Posts: 10012
- Joined: Sat Feb 28, 2009 10:34 am
- cars: TX Gemini 2L Twincam 8psi
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Subaru WRX 2007
Re: VY V6 Flashed ECU runs great until VATS Light starts flashing
Do you mean VATS or CEL? If CEL, try reading the codes to see what the logged fault is.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
Muncie
- Posts: 231
- Joined: Wed Dec 02, 2020 6:15 am
- cars: Vy commodore, Turbo Ecotec v6
- Location: New Zealand Waikato
Re: VY V6 Flashed ECU runs great until VATS Light starts flashing
My VY will randomly run with security light flashing but i dont get any running issues can you post a vid of the light amd it running bad. A log would be awesome if you have a lead and software to plug in