VY V6 060B advantages over 060A?

Holden/Delco Tuning. ALDL, OBD 1.5. Circa 1989 to 2004.
User avatar
Muncie
Posts: 249
Joined: Wed Dec 02, 2020 6:15 am
cars: Vy commodore, Turbo Ecotec v6
Location: New Zealand Waikato

VY V6 060B advantages over 060A?

Post by Muncie »

Hey Lads

Whats the perceived differences or improvements in 060B ? Ive had a quick look and found a few things but only just started scratching surface.

Be good if i didn't have to go through whole thing if someone else has some information please do share.

Im working on an economy tune and chosen 060B as the base to build on but may rebuild and use for my Turbo VY ONEROM flash PCM eventually. Ive noticed cars running it seem far more snappy as a general observation.

Thanks
Dave
Wade
Posts: 1247
Joined: Sun Jul 10, 2016 8:29 pm
cars: Vr 5.0 statesman vr exec 5.0 turbo vy clubsport

Re: VY V6 060B advantages over 060A?

Post by Wade »

Muncie wrote: Tue Sep 22, 2026 8:06 am Hey Lads

Whats the perceived differences or improvements in 060B ? Ive had a quick look and found a few things but only just started scratching surface.

Be good if i didn't have to go through whole thing if someone else has some information please do share.

Im working on an economy tune and chosen 060B as the base to build on but may rebuild and use for my Turbo VY ONEROM flash PCM eventually. Ive noticed cars running it seem far more snappy as a general observation.

Thanks
Dave
I’m not sure if the code is different in any way. But there is some changes in the calibration. From memory, some more upshift line pressures. Some slight changes in ESC and quite a few in the maf settings. That’s why I asked The1 about it. The general consensus is that you don’t need to change maf settings unless you’ve changed intake flow ect. But to my knowledge the intake is identical from series1 to series 2. So I found it a bit odd that there would be so many maf changes. I do remember trying to play with ae as I was getting a lean tip-in when ever I punched the throttle. All the parameters in ae that I adjusted didn’t seem to do jack shit. But after having another look at the maf settings I’m now thinking that’s a better place to look! Although I haven’t had the time to test it.
User avatar
Muncie
Posts: 249
Joined: Wed Dec 02, 2020 6:15 am
cars: Vy commodore, Turbo Ecotec v6
Location: New Zealand Waikato

Re: VY V6 060B advantages over 060A?

Post by Muncie »

Ive got 2/3 into porting enhanced over to 060b now as its definitely a bit more efficient and even the dead stock version gives much better fuel consumption.

My sons getting around with an Economy version i cooked up tuned out as much slip as possible in the trans added 2 degrees in the cruise area hes consistantly under 10l/100 now mid 9s is very achievable even with his teenage driving antics. An older bloke i tuned up his Calais for is sitting in the mid 8s for Economy. Ive added vx coms and cant wait to try in the earlier cars see how they improve.

Petrol is $3:50 a litre for 91 and 98 is $4 in NZ at moment so i economy tunes are my pivot and people are keen! And 060b seems to have some good strategy over 060a
Wade
Posts: 1247
Joined: Sun Jul 10, 2016 8:29 pm
cars: Vr 5.0 statesman vr exec 5.0 turbo vy clubsport

Re: VY V6 060B advantages over 060A?

Post by Wade »

Yeah it’s a pretty good tune. It’s what I run in mine. Although I don’t think there is any adx’s floating around for it?
User avatar
antus
Site Admin
Posts: 10111
Joined: Sat Feb 28, 2009 10:34 am
cars: TX Gemini 2L Twincam 8psi
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Subaru WRX 2007

Re: VY V6 060B advantages over 060A?

Post by antus »

The way to find out would be to get claude to compare the two bins calibration segments. give it the adx you have. tell it to track likely calibration changes and look for a change in the pattern which indicates an item was removed or added. Tell it, that it can use code references to figure out the difference between a changed calibration item, and added or removed item. If something was removed, you'll know what it was because it's gone. If it was added then you'll have to see if you have enough tokens for it to disassemble and figure out what it is. Fuel economy etc is mainly going to be from a more developed calibration, not code changes. But there will be some minor code changes that make 06A and 06B different.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Wade
Posts: 1247
Joined: Sun Jul 10, 2016 8:29 pm
cars: Vr 5.0 statesman vr exec 5.0 turbo vy clubsport

Re: VY V6 060B advantages over 060A?

Post by Wade »

If this ends up proceeding. I might be interested in doing the xdf.
User avatar
antus
Site Admin
Posts: 10111
Joined: Sat Feb 28, 2009 10:34 am
cars: TX Gemini 2L Twincam 8psi
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Subaru WRX 2007

Re: VY V6 060B advantages over 060A?

Post by antus »

because the changes will be very minimal it should be quite possible for an AI to port the XDF and to confirm its own work with code disassembly.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Wade
Posts: 1247
Joined: Sun Jul 10, 2016 8:29 pm
cars: Vr 5.0 statesman vr exec 5.0 turbo vy clubsport

Re: VY V6 060B advantages over 060A?

Post by Wade »

I don’t mind. This time I’d just take my time and start from scratch. If I end up completing a $060b xdf and there’s still no adx for it I’ll msg you. So you can run me through all this ai stuff, as I’ve never used anything like ai
Wade
Posts: 1247
Joined: Sun Jul 10, 2016 8:29 pm
cars: Vr 5.0 statesman vr exec 5.0 turbo vy clubsport

Re: VY V6 060B advantages over 060A?

Post by Wade »

We really do need some good adx files. Plus a way to silence the bcm as these things can be a bit hard to connect too.
User avatar
antus
Site Admin
Posts: 10111
Joined: Sat Feb 28, 2009 10:34 am
cars: TX Gemini 2L Twincam 8psi
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Subaru WRX 2007

Re: VY V6 060B advantages over 060A?

Post by antus »

I doubt the ADX is much different, if different at all. Should be easy, or just use the 06a one. If it looks different then a look at where in the mode1 packet the numbers all start looking wrong will tell you an item was added or removed, then you can offset the addresses to suit from that point and you'll have the equivalent. If you don't use AI to verify it with decomplication the quality may suffer. Not saying it will, just you won't have that verification step. Quality is always the hard part in this fast and loose world we've found ourselves in.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396