Hey Lads
My Onerom 060a/b Ecotec flash pcm has been running the car well for a few months i was developing live telemetry from data out of the Onerom and although i got this to work the car would sporadically stall. Seeing as ive got a few spare Onerom equipped PCM'S floating around now i thought id build a flash tool to run on the ARDUINO till i have the logging and dash sorted.
Ive got it working now Bins are loaded to an SD Card and you select and load on the touchscreen in car.
Just 3 tunes so far but in theory you could have a stack! Ive got Enhanced 060A as a base file an economy 060b and a ghost cam crackle tune on there so ive got some really different behavior to observe and test.
Telemetry dash video --> https://youtube.com/shorts/3R5KO8rOHBA? ... ehVe2cywYB
Re: Hybrid Flash ECOTEC PCM ONEROM-ESP32S3 Flash tool
-
Muncie
- Posts: 249
- Joined: Wed Dec 02, 2020 6:15 am
- cars: Vy commodore, Turbo Ecotec v6
- Location: New Zealand Waikato
Re: Hybrid Flash ECOTEC PCM ONEROM-ESP32S3 Flash tool
You do not have the required permissions to view the files attached to this post.
-
Rapidfire
- Posts: 66
- Joined: Sun Oct 18, 2026 9:56 am
- cars: Vp Group A Rep
Ve 6.0 Lsa 6 speed Ute
Vf Redline Wagon
L300 Van with 3.8 Buick
Re: Hybrid Flash ECOTEC PCM ONEROM-ESP32S3 Flash tool
Hey MuncieMuncie wrote: Sat Nov 07, 2026 6:38 am Hey Lads
My Onerom 060a/b Ecotec flash pcm has been running the car well for a few months i was developing live telemetry from data out of the Onerom and although i got this to work the car would sporadically stall. Seeing as ive got a few spare Onerom equipped PCM'S floating around now i thought id build a flash tool to run on the ARDUINO till i have the logging and dash sorted.
Ive got it working now Bins are loaded to an SD Card and you select and load on the touchscreen in car.
Just 3 tunes so far but in theory you could have a stack! Ive got Enhanced 060A as a base file an economy 060b and a ghost cam crackle tune on there so ive got some really different behavior to observe and test.
Telemetry dash video --> https://youtube.com/shorts/3R5KO8rOHBA? ... ehVe2cywYB
Looks great
very similar to what i got, i use esp32-p4 with bluetooth
i use obdx pro gt to obd in car, thats bluetooth`s to esp32-p4 for Dash readouts
then i connect fire 32b to esp32-p4 then esp32-p4 to my laptop with tuner pro rt
this is all bridged, so you get read out on p4 and real time tuning on tuner pro
wanting to do next is wifi esp32-p4 to laptop so no cables and wire free tuning
all this with my onerom app
and its seamless with no stalls
waiting on 10.1inch display to turn up
screen shot is 7inch
You do not have the required permissions to view the files attached to this post.
-
Muncie
- Posts: 249
- Joined: Wed Dec 02, 2020 6:15 am
- cars: Vy commodore, Turbo Ecotec v6
- Location: New Zealand Waikato
Re: Re: Hybrid Flash ECOTEC PCM ONEROM-ESP32S3 Flash tool
That's an awesome setup! Are your dash readings coming from the OBDX over ALDL, while the Fire32B is used separately for TunerPro Ostrich emulation? We've now got PCM RAM data streaming through OneROM Host Control to an ESP32 at 10 Hz, completely bypassing ALDL. I'm particularly interested in how you've implemented the simultaneous TunerPro bridge.
-
Rapidfire
- Posts: 66
- Joined: Sun Oct 18, 2026 9:56 am
- cars: Vp Group A Rep
Ve 6.0 Lsa 6 speed Ute
Vf Redline Wagon
L300 Van with 3.8 Buick
Re: Re: Hybrid Flash ECOTEC PCM ONEROM-ESP32S3 Flash tool
You are right no more ALDL on oneromMuncie wrote: Sun Nov 08, 2026 8:18 am That's an awesome setup! Are your dash readings coming from the OBDX over ALDL, while the Fire32B is used separately for TunerPro Ostrich emulation? We've now got PCM RAM data streaming through OneROM Host Control to an ESP32 at 10 Hz, completely bypassing ALDL. I'm particularly interested in how you've implemented the simultaneous TunerPro bridge.
the ESP-32-P4 takes over, its in my firmware for P-4
and yes to OBDX Pro GT to car obd, thats bluetooth to p-4 for dash
Now Fire 32B goes straight to ESP32-p4 in my firmware creates a bridge to laptop, Laptop thinks its connected to onerom, P-4 just pushes messages through,
Just working on WIFI bridge to laptop but it needs to see a com port to connect to onerom
P-4 is best choice, play music, watch movies cuts out when you start driving, jump on web to check out whats happening on Pcmhacking.
Shit skys limit now with onerom
Hey one other thing, i havnt tested this yet, what if we change the usb firmware in onerom to accept Bluetooth dongle and make everything wireless or a WIFI dongle ????????????
-
antus
- Site Admin
- Posts: 10111
- Joined: Sat Feb 28, 2009 10:34 am
- cars: TX Gemini 2L Twincam 8psi
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Subaru WRX 2007
Re: Re: Hybrid Flash ECOTEC PCM ONEROM-ESP32S3 Flash tool
the firmware is open source, nothing stopping you from modifying the hardware and software and doing that in your own fork if keep it under the same license.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
Rapidfire
- Posts: 66
- Joined: Sun Oct 18, 2026 9:56 am
- cars: Vp Group A Rep
Ve 6.0 Lsa 6 speed Ute
Vf Redline Wagon
L300 Van with 3.8 Buick
Re: Hybrid Flash ECOTEC PCM ONEROM-ESP32S3 Flash tool
Need power to onerom when its in memcal, take 5v from ecu-pcm to firerom 28abc or 32ab for bluetooth or wifi this plugs in oneroms usb port
looking at firmware to modify for this to work
making this setup wireless and esp32-p4 as the bridge
and yes this is open source free for anyone to do !!
jxx motes firmware is on my github free for all
just need AI to help you to recompile
looking at firmware to modify for this to work
making this setup wireless and esp32-p4 as the bridge
and yes this is open source free for anyone to do !!
jxx motes firmware is on my github free for all
just need AI to help you to recompile
-
Rapidfire
- Posts: 66
- Joined: Sun Oct 18, 2026 9:56 am
- cars: Vp Group A Rep
Ve 6.0 Lsa 6 speed Ute
Vf Redline Wagon
L300 Van with 3.8 Buick
Re: Hybrid Flash ECOTEC PCM ONEROM-ESP32S3 Flash tool
I will confirm Laptop is now connected to esp32-p4 via wifi
esp32-p4 has a hotspot for wifi
firerom is still usb-c to usb-c on esp32-p4
OBDX pro gt is bluetooth to esp32-p4 this connects to cars odb port
These connections are bridged
fire onerom is direct connect wifi to pc WiFi via com port - to tuner pro rt it is now portable no cables, just need to check transmit distance. and power output
and esp32-p4 is dash display and operates normally with out any issues
current cpu usage is at 18% cpu and 66 fps with all this running
Forget about ALDL no need to connect it to ecu-pcm
ESP32-P4 has Bridged that gap
What ever the OBDX PRO GT can log thats what you can display on P-4, just got to set your screen to how you like.
Game changer
esp32-p4 has a hotspot for wifi
firerom is still usb-c to usb-c on esp32-p4
OBDX pro gt is bluetooth to esp32-p4 this connects to cars odb port
These connections are bridged
fire onerom is direct connect wifi to pc WiFi via com port - to tuner pro rt it is now portable no cables, just need to check transmit distance. and power output
and esp32-p4 is dash display and operates normally with out any issues
current cpu usage is at 18% cpu and 66 fps with all this running
Forget about ALDL no need to connect it to ecu-pcm
ESP32-P4 has Bridged that gap
What ever the OBDX PRO GT can log thats what you can display on P-4, just got to set your screen to how you like.
Game changer
-
Rapidfire
- Posts: 66
- Joined: Sun Oct 18, 2026 9:56 am
- cars: Vp Group A Rep
Ve 6.0 Lsa 6 speed Ute
Vf Redline Wagon
L300 Van with 3.8 Buick
Re: Hybrid Flash ECOTEC PCM ONEROM-ESP32S3 Flash tool
Muncie i like your setup, i cant do that. i havnt looked host control
this could be dual setup !!!
Your host control, with load what ever bin file you like
then another for logging dash + tuner pro rt.
There is now a few different ways this can work
this could be dual setup !!!
Your host control, with load what ever bin file you like
then another for logging dash + tuner pro rt.
There is now a few different ways this can work
-
Rapidfire
- Posts: 66
- Joined: Sun Oct 18, 2026 9:56 am
- cars: Vp Group A Rep
Ve 6.0 Lsa 6 speed Ute
Vf Redline Wagon
L300 Van with 3.8 Buick
Re: Re: Hybrid Flash ECOTEC PCM ONEROM-ESP32S3 Flash tool
Muncie ill put the firmware on my github in next couple days for everone to have play with, its the wired ver not wifi verMuncie wrote: Sun Nov 08, 2026 8:18 am That's an awesome setup! Are your dash readings coming from the OBDX over ALDL, while the Fire32B is used separately for TunerPro Ostrich emulation? We've now got PCM RAM data streaming through OneROM Host Control to an ESP32 at 10 Hz, completely bypassing ALDL. I'm particularly interested in how you've implemented the simultaneous TunerPro bridge.
be able to see bridging connections, its set for 4.3 esp32-p4 all docs be there with how toos
its a working version plug and play.
If everyone could fork the project like Antus Said
by antus » Sun Nov 08, 2026 10:40 pm
the firmware is open source, nothing stopping you from modifying the hardware and software and doing that in your own fork if keep it under the same license.
-
Muncie
- Posts: 249
- Joined: Wed Dec 02, 2020 6:15 am
- cars: Vy commodore, Turbo Ecotec v6
- Location: New Zealand Waikato
Re: Re: Hybrid Flash ECOTEC PCM ONEROM-ESP32S3 Flash tool
Im aiming to have Wifi to laptop as well and this ESP32 has it but my intention is to just have the Dash fitted permanently in car as my gauges logging and map selector. When i want to tune will hook up over wifi and do it there with ESP32 providing the connection the dash and Onerom will have a single USB C connection between them.
The testing of non ALDL logging is going ok and indeed works but needs some bugs sorted out can indeed deliver far higher logging speeds but i need to not have everything going flat out i dont need battery voltage at 20hz for example so ALDL can just be for the car. Currently ALDL and Rom bus logging can run concurrently i think i need to get the timing better to address the stalling.
The testing of non ALDL logging is going ok and indeed works but needs some bugs sorted out can indeed deliver far higher logging speeds but i need to not have everything going flat out i dont need battery voltage at 20hz for example so ALDL can just be for the car. Currently ALDL and Rom bus logging can run concurrently i think i need to get the timing better to address the stalling.