Have recently switched to a Starr inlet manifold (modified elbow and lager TB).
The biggest restriction, in the intake, is now the OEM MAF.
I'm now looking to move away from the OEM MAF and airbox and switch to an LS MAF and a Mace airbox.
Has anyone done this conversion before?
If so would you have the table/ scaling info handy?
Vehicle is a VS S3 5ltr (sequential injection).
- will be utilising the LS inlet air temp sensor as the OEM will be removed with the airbox.
TIA!
VS 5ltr MAF rescale to suit LS MAF
-
zilcH367
- Posts: 1
- Joined: Tue Oct 20, 2026 10:02 pm
-
Wade
- Posts: 1247
- Joined: Sun Jul 10, 2016 8:29 pm
- cars: Vr 5.0 statesman vr exec 5.0 turbo vy clubsport
Re: VS 5ltr MAF rescale to suit LS MAF
There is a maf scaling spreadsheet on here somewhere. The main problem is. When you fit a larger maf, and try scaling it the traditional way. You lose resolution. So a way around that is to leave the maf scaling and tune via the injector multiple tables instead. There’s also maf delta and compensating tables variables based on a whole range of things like temp, rpm ect ect. But no one really talks about that or modify’s those. Also depends on if that stuff is even in the xdf in the first place. The easiest way is to just fit the new larger maf in roughly the same place and distance away from the throttle body, and tune via the injector multiple tables.
-
brindo
- Posts: 335
- Joined: Sun Jun 28, 2009 11:43 pm
- Location: Western Queensland
Re: VS 5ltr MAF rescale to suit LS MAF
I’m running a VZ MAF on a VT 5.0 PCM. Before that I had this set-up on a VS Series 3 which is effectively the same PCM. Used an adapter harness and it plugged straight into the factory connectors. Both had the factory air box not the MACE ones.
I originally thought I needed to rescale the MAF tables, but you don’t. As above, just adjust the Injector Rate Constant Vs mg/cyl Vs RPM to suit. It will work fine.
I originally thought I needed to rescale the MAF tables, but you don’t. As above, just adjust the Injector Rate Constant Vs mg/cyl Vs RPM to suit. It will work fine.