just thought id start this thread and fill in blanks soon,
this could flash your tune, Data scan like dash board, VVE editor, wide band.
by using OBDX PRO GT or any compatable OBDII for wired or wireless
It wouldn't be real time tuning but it could replace pc, and add another dynamic to evolving future
ESP32 Handheld controller and scanner for Canbus
-
Rapidfire
- Posts: 66
- Joined: Sun Oct 18, 2026 9:56 am
- cars: Vp Group A Rep
Ve 6.0 Lsa 6 speed Ute
Vf Redline Wagon
L300 Van with 3.8 Buick
-
greaseonmyhands
- Posts: 4
- Joined: Tue Nov 15, 2022 1:17 pm
- cars: 15 Sierra (Stock) 5.3 4wd
14 Silverado - Built 6.6 10spd 4wd - Location: Missouri, USA
Re: ESP32 Handheld controller and scanner for Canbus
Ive got a pretty cool project ive built with an M5Stack Tab5. Has dual esp32 chips, and with a simple canbus transceiver can read, log, and scan signals on its own. Ive built out HS and LS can comms, Dragy accurate GPS connection for data recording, and cellular chip for remote notifications and log sharing. Just have to add an extra chip for each of those functions, so can get a little bulky. Still ironing out the packaging for all that.
Edit:
Its been really useful in making logs for AI to analyze, because I can log everything on canbus, and simultaneously log a bunch of PIDs, and then AI can easily corelate them together. The files made by the signal logger are formatted the same as HPTs VCM scanner, so the files can be opened and viewed there too. The logs are all saved to the onboard SD, I usually just have Claude import them over USB.
It does a good job reading and clearing codes, and I've got quite a few bidirectional controls working like fuel pump, fans, windows, locks.
I can share more details if anyone has interest.
Edit:
Its been really useful in making logs for AI to analyze, because I can log everything on canbus, and simultaneously log a bunch of PIDs, and then AI can easily corelate them together. The files made by the signal logger are formatted the same as HPTs VCM scanner, so the files can be opened and viewed there too. The logs are all saved to the onboard SD, I usually just have Claude import them over USB.
It does a good job reading and clearing codes, and I've got quite a few bidirectional controls working like fuel pump, fans, windows, locks.
I can share more details if anyone has interest.