Hi,
What are people using for 0-5 volt pressure transducers these days?
Pressure Transducers
-
immortality
- Posts: 3823
- Joined: Thu Apr 09, 2009 2:31 am
- cars: VS,VT,VX,VE
-
onslaught
- Posts: 7
- Joined: Mon Feb 16, 2026 5:09 am
- cars: Old holdens
Re: Pressure Transducers
What range are you looking for?
EFI solutions have a fair variety of stuff. The main problem for car guys is heat and vibration so if its possible to remote mount the sensor its a good idea to consider.
The other thing is seal type, not all play nice with fuels/oils so check that out if shopping elsewhere.
EFI solutions have a fair variety of stuff. The main problem for car guys is heat and vibration so if its possible to remote mount the sensor its a good idea to consider.
The other thing is seal type, not all play nice with fuels/oils so check that out if shopping elsewhere.
-
immortality
- Posts: 3823
- Joined: Thu Apr 09, 2009 2:31 am
- cars: VS,VT,VX,VE
Re: Pressure Transducers
In this case we are looking to monitor transmission line pressure so we need up to about 400psi
-
vlad01
- Posts: 8600
- Joined: Mon Oct 08, 2012 8:41 am
- cars: VP I S
VP I executive
VP II executive
VP II executive #2 - Location: Kyneton, Vic
Re: Pressure Transducers
Had a look on RS, none of them are cheap. But here is one that meets the range and electrical specs.
Not the best for temps, but a length of line from the auto will stop the heat getting to it. Kinda like how exhaust pressure sensors use a coil of tube to isolate the extreme heat from the relatively delicate sensor.
https://au.rs-online.com/web/p/pressure-sensors/0761285
Not the best for temps, but a length of line from the auto will stop the heat getting to it. Kinda like how exhaust pressure sensors use a coil of tube to isolate the extreme heat from the relatively delicate sensor.
https://au.rs-online.com/web/p/pressure-sensors/0761285