Hey guys, Has anyone successfully used $11P on a 424 with a manual transmission? I'm trying to help someone out who is doing a 5L conversion in a manual patrol. I know the best option is probably $12P and a '808, but they already have the '424 and would prefer to just use that if possible. Is it jus...

Is it the name of the table that's wrong, or the bubble that's wrong?

I guess the bubble is defined by the XDF somehow.

If the name is right but bubble is wrong it might send you down the wrong path.

Hey guys, I'm wondering how interchangeable AU Falcon EECV PCM's are. Can I flash any file onto any PCM? EG. Turn a 6cyl PCM into a V8? Or a Intech into a VCT? Or a series 1 into a series 2? etc etc. I've got a couple of them here and I opened them up out of curiosity. One is from a 6cyl intech auto...

Awesome mate thanks for your help.

I found a very helpful forum post here: https://forum.efilive.com/showthread.ph ... -with-LTFT
which was useful in explaining how the open loop / closed loop works in this OS

Mod edit: Please do not post commercial software

BIN is attached

Hey guys, I've got a friend with a 2001 VU ute LS1. They purchased it some time back with an OTR intake and MAFless tune already installed. They have been complaining it doesn't always idle very well and smells like its running rich. We cannot find anything else wrong other than it running rich - to...

Looking at the 3d printed part and paper part pictures the edges of the 3x look to line up with the edges of the 18x? Doesn't the 3x sync work by counting the 18x transitions during a 3x sync pulse? There for the edges should be offset? EG. The 3d printed one, the largest 3x slot has 2x 18x transiti...

The cbus stuff looks a lot like SPI

It will only export whatever is in that exact sketch that you right click on. If you have drawn it up over a series of multiple sketches, you can create another sketch and then use the "Project" tool (P key) to include all the geometry from the sketches underneath in the new one, then expo...

With fusion 360 you can export sketches as DXF. Once the sketch is complete, right click it on the panel on the LH side and select save as DXF.