hi everyone i earthed out the wires near the ecu but still nothing .

i'm just going to chase down a new engine loom thanks for the help, will post results when i install new loom.

thanks yeah i dont want to let it beat me, i recon were getting close . cool ill slice these earths tonite and c if it makes a diffrence, the only thing it can be now is a fault in the circut yeah? im borrowing a multi-meter off a m8 tommorow so if this doesnt work , i might have to get u to post up...

yeah near the pcm theres one 8 pin plug that runs into engine loom just above pcm( i forgot to hook this up to start with and had no fuel pump), then there is 3 more plugs a 3 pin, 2pin and a 6 pin. (im assuming there spare plugs for cruise or somthing) . im about to slice the wires off pcm the midd...

yeah it ran heaps better, held idel alot better and didnt stink as much. just to get it clear b4 i chop into anything , cut the black wires at pcm A1, A2, B1,B2,D14,D16 join together and earth on body of car? pins in pcm all good when i was looking there are 3 other clips running out of the loom wer...

data log 4.xdl here is the data log i give the whole loom a bit of a shack . error codes 22, 23,32 are gone, i unpluged the maf sensor at the end of the log just to c if it would set the code thats y that pops up. could this have been the earth, is it possible to run a extra earth or two just to be...

cheers mate yeah the auto ran fine it was in my mates vt untill he hit a tree and wrote it off , ill post up another log shaking the harness.

does anyone have a wiring diagram for the vs commodore ?

i just cleaned the bolts and eath clips with a wire brush the one the pasanger side had some cracks in the wire so i replaced it .
no change.

i tested the iat and couldnt seem to get power through it ?

i checked the power at both spots and both have power with key on ? ( im only using a test light as i dont have a multi-meter )

lol amature mistake, iv checked the maf sensor and arrow faces towards the t.b it doesnt seem to be damaged in anyway but iv unpluged it whill the car was running and it did nothing ? i have the maf sensor off the vt ill replace it with that and c if it makes a diffrence. i was just reading about th...