what is the time frame you are looking at to get onto the market I REQ ONE BIG TIME

I am running a thin throttle body manifold with twin plenem chambers on my 355 can i run 2 ICV.s one on each throttle or onty one there is a balance tube that is on the back of the manifold to even it out The 4 wires to the icv one of them wood be a signal back to the ecu witch one and i dont think ...

how much should I pay for one and where is the best place to buy 1 from ebay want a round a 120 dollars

Ok the ecu is still good the pin is good and it can still run on my memcal
i think the nvram is corrupted can sumeone out there reprogram the ram fore me or do i by a nother one programed to be safe

i think i have stuffed me nvram all was going good untill the last time i fitted the board i turned the ignition on and the ecu went in to limp home i removed the nvram board from the ecu and i had bent the top left pin i have refitted my eprom and all is good so i think my ecu is good i refitted th...

well well well if you tick cable echo it works

i am lost i cant get tunerpro to work i have folled the tunerpro setup i have the right usb serial port and plugin.dll all of that is good but when i plug the the ecu to the car and start up tunerpro it cant find the hardwaer i have both the blue leds on and when i try to initialize hardwara i get t...

The first one i did was on a s2 engine The owner had fitted a big exhaust extractors big cat air box mods and a chip??? and v8 throttle body After i fitted the manifold he told me the manifold made the biggest power increase of any mod he had done so far After that we fitted a sc14 to it after that ...

this is what i was running on my torana i have made up a new manifold $80
call Daniel 0425212787

Hi this is a s1 vn v6 manifold i made i have had good results with the first one i made for a s2 engine and this one has bean laying around for a couple of years
call for more info Daniel 0425212787