gday

vl400s write up he was referring to v1.20. ive actually got v1.45 if it has the corrections for the checksum it should make it fairly straight forward.

increasing ignore time might be the first thing i adjust.

thanx

Im going off the advice of vl400 on using the The FlashTool V1.20 with flash pcm's. And the knock retard i haven't worked out what's going on there. ive looked at other logs from people on here with similar vehicles it looked like its common, im not trying to say thats its safe just hoping its not a...

So it should b a flash pcm being a dtcf? looking at the results in the memcal idtool none of the numbers match up with what i have here but anyway. i guess ill swap them over and do a couple of get bins from it, then hope that writing down the full bin from my original pcm works ok. Any advice or ca...

Thanx guys

I thought there was a chance I had seen reference numbers on the I'd tool, only I didn't have my laptop.

So I got the PCM hoping its right,
the numbers on it are: service no. 09356445 and its a dtcf.

Cheers

Gday guys

Just looking for help with how to identify a vy auto pcm by looking at the unit?

Thanx in advance

Gday guys I'm still wanting to sort out why it is i'm getting knock retard occuring during light load, like when travelling at 100km/h with cruise set. Does anybody have some advice on what i should look into to find what the course is? Am i likely to find something in a log or will it most likely b...

Thanx mate for the info it helps with understanding whats going on.

Ill be needing to try and work out why i'm getting the knock retard before i even look at making any changes to spark advance.

Thanx antus If logging is working correctly i seem to get a couple of degrees being pulled what i would imagine is quite regularly for light driving conditions, whether that's normal for the original tune. And sorry i was referring to the flags in the XDF. The CYLINDER 1 NOK SENSOR PRESENT flags hav...

Hi guys I'm hoping some one can help again, i'm using the VX Engine and trans TP5 V104 yoda69 edition adx for logging and i'm wanting to know if the Knock Retard Degress Cyl#1 to #6 is the timing pulled from actual knock or timing being pulled for some other reason? Also under flags what do CYLINDER...

I should be set now with the ID tool. I had read of it on here before just hoped i didnt need it and already had wat i needed.

Thanx again