If you are going to get a shop to tune it you are best to talk with them as not all shops will tune all kinds PCM's when it comes to the delco. I run a flash PCM on a heavily modded L67 and the only pain is the non real time. It's not all that bad just not ideal. I have not bricked one in hundreds o...

Hi guys im putting a vx L67 into a vy using the standard VY harness and non removable memcal ECU. can anyone list what i need regarding hardware and software to reflash the ECU? I have tunerPro Rt v5 and ALDL cable. thanks If you have a cable and tuner pro you will only need the flash tool to read ...

Not had it on this site but one other sitenu visit regularly the s from the https keeps dropping off and I need to go and add it back in

Holden202T wrote:i think you'll find its more to do with what their tuner wants to use

This is very true.

Question is who thinks the customer should be able to have input or is it just to difficult for the tuner to know their way around several platforms?

My VY manual V6 has traction control

Would anyone have some wiring diagram's for a 2010 ford territory?

Mostly looking for some information about the factory reversing camera on the Ghia

They mill out the adaptor so thats sorted you just need one vac line.
You may be able to drill one i to the side of the adaptor?

What ubend are you using and if its the stock one what adaptor plate are you going to run.

I made my own adaptor for the stock ls1 throttle body and drilled the adaptor for one fitting and cut out a section of the plate so the fitting on the throttle body worked

Unfortunately he not making them at the moment

Sounds expensive mine was arpund the 5k mark