Okay I modified the VATS and Column lock off and reflashed the cal. Ready to plug into the car and test start but I don't think the neighbors would appreciate a first start with no exhaust at 2am. Thanks everyone for all your help. I'll be keeping an eye out to repay contributions to the forums wher...

Success but with a lot of retries. [12:12:06:281] VIN: 1GCFG25T751110131 [12:12:06:330] OS ID: 12592618 [12:12:06:367] Calibration ID: 12591721 [12:12:06:416] Hardware ID: 12589161 [12:12:06:532] Serial Number: 0MA016NV4218 [12:12:06:577] Broad Cast Code: YHZP [12:12:06:613] MEC: 0 [12:15:32:000] C:...

^^ That is an excellent sequence. I just did something almost exactly that before I read it and I'm connected. Success this time with a test write. @Gampy was correct no pin required. debug log attachment pcm hammer test write log.txt [12:00:01:508] PCM Hammer 014 [12:00:04:271] Voltage: 12.2V [12:0...

you have it all set up and running ready to read then you bridge the pin between the red marks and one of the ground points momentarily. A couple are marked with black Xs, you can identify them as looking like pads but they are connected to large solid areas of the PCB. Then you begin the read or w...

I'm trying to collect more data for you guys but I'm having some issues. I rebooted everything and afterwards I had a hard time initializing the device in PCM Hammer. Finally have it connected but now I can't even get a Read Properties to work. [11:06:06:992] PCM Hammer 014 [11:06:08:413] Voltage: 1...

I did a test write using the original van bin i had and it failed. [09:48:49:008] C:\Users\Peter\Downloads\PcmHammer014\PcmHammer014\2005Van.bin [09:48:50:017] Validating 1024k file. [09:48:50:022] Start End Stored Needed Verdict Segment Name [09:48:50:029] 00000 FFFFD 8988 8988 Good Operating syste...

I tried reading the PCM with PCM Hammer 014. It worked well at first, but after the read completed it started a verification and failed, after 5 minutes with no update i hit cancel. ... [09:08:53:781] 0x0FE000 99% 00:08 [09:08:54:769] 0x0FE400 99% 00:07 [09:08:55:798] 0x0FE800 99% 00:06 [09:08:56:82...

Okay bad news :( I tried grounding the correct pin but with no success. I tried it with various timing at various points while trying to connect, no success. I attached some screenshots to explain better where the communication is breaking down. I load up LS Droid select Read, click on P01/P59 then ...

Gampy wrote: vvise,
Are you saying that bin (2005Van.bin) is the original (unmodified by you) file off that PCM ??

correct.

The VIN looks okay here: http://www.free-vin-decoder.com/vin/1GCFG25T751110131
lines up with what I saw in the donor.

As Antus suspected, wrong XDF for the OS ... In the title bar of TunerPro it says you are using the XDF for OsID: 125 87 603 The bin file you attached (2005Van.bin) is OsID: 125 92 618 That is a fail ... You MUST use the proper XDF for the OsID. That I know of there is NO XDF for OsID: 12592618. It...