VY SS Sedan auto

Post any other rides you have here
User avatar
Posts: 156
Joined: Tue Dec 17, 2013 1:05 am

Re: VY SS Sedan auto

Postby Ken » Sun Jun 16, 2019 6:51 pm

Without me downloading and loading your tune's into efilive, figured I'd ask, seeing you've made a cam change a few posts back, have you played around with end of injection timing at all yet, and if so, how'd you come to the best setting to suit your tune.
I'd also be thinking the VE tables would need a fiddle after each EOIT change.

Posts: 558
Joined: Mon Jul 11, 2016 6:29 am

Re: VY SS Sedan auto

Postby Wade » Sun Jun 16, 2019 7:09 pm

No haven’t played with eoi

Posts: 558
Joined: Mon Jul 11, 2016 6:29 am

Re: VY SS Sedan auto

Postby Wade » Tue Jun 18, 2019 8:14 pm

Me $150 intercooler piping kit arrived. Should be enough for one side. I’ll need another one for the passenger side. But I’m undecided on pipe diameter for passenger side. Turbo outlet is 2.5” and cooler is 3”. Some say if you go 3” all the way it adds to lag and some say makes no difference. What’s do all you guys think? 2.5” would be easier to work with bit 3” means I’ve got more then enough left over. I also ordered some generic 2.5” header flanges in 10mm mild steel but the bolt holes are different to the ls2 stock cast manifolds. Anyone know where I can get some good flanges from
Attachments
4E9A6847-2D35-4101-9C13-16A594551B2C.jpeg

Online
User avatar
Posts: 4838
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ

Re: VY SS Sedan auto

Postby delcowizzid » Tue Jun 18, 2019 8:20 pm

I do 3" all the way from the turbo.less restriction in the bends
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem

Posts: 558
Joined: Mon Jul 11, 2016 6:29 am

Re: VY SS Sedan auto

Postby Wade » Thu Jun 20, 2019 8:10 pm

3” it is

Posts: 558
Joined: Mon Jul 11, 2016 6:29 am

Re: VY SS Sedan auto

Postby Wade » Tue Jul 02, 2019 1:28 pm

I really need to start making some room
Attachments
E4A40903-785D-4AF5-BB18-67F0E7288987.jpeg
1B86BD42-DB42-496E-A6CA-15DD55A09861.jpeg
02ADB44D-8A72-476D-BD33-08B3A125C27C.jpeg

User avatar
Posts: 9724
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW

Re: VY SS Sedan auto

Postby Holden202T » Wed Jul 03, 2019 1:30 pm

its not much bigger than stock hahahaha!

Posts: 558
Joined: Mon Jul 11, 2016 6:29 am

Re: VY SS Sedan auto

Postby Wade » Wed Jul 03, 2019 6:52 pm

Stock is only like 2.5” outlet. I’m using sch40 1.5” runners into 3” log. The log will drop down to 2.5” for the cross over. Nothing fancy just getting the job done.

Posts: 558
Joined: Mon Jul 11, 2016 6:29 am

Re: VY SS Sedan auto

Postby Wade » Wed Jul 03, 2019 6:56 pm

It really will be a sloppy mechanics build. Even the 45mm turbosmart gate is getting welded off the exhaust housing. The main thing I like about it all, is it’s compact kinda stock looking and proven for an easy 500-600hp.

Posts: 558
Joined: Mon Jul 11, 2016 6:29 am

Re: VY SS Sedan auto

Postby Wade » Thu Jul 04, 2019 11:38 am

Well cold air intake was pretty easy to sort out. Went with the old ss induction setup. Over the radiator into large 4” outlet, dumped right at the turbo. Will just need to add an inclosed filter to complete that side of it
Attachments
F946070D-14E0-403F-8A56-FAE5F513E789.jpeg
08FE5241-C9A4-4B66-B00D-8329CD452464.jpeg
A4D7535C-0D1C-4174-A906-96B3D72409CC.jpeg
CD24FF5D-BDEA-4DC8-8EAC-E0BF39FB1DB7.jpeg

PreviousNext

Return to Other Rides

Who is online

Users browsing this forum: No registered users and 2 guests