OSEPlugin for Tunerpro 5 v1.80

[VX L67 Getrag]

TP5 & maybe earlier too keep your last loaded log in the system & even if you uninstall & re-install it will keep finding it.

Up the top when tp5 opens does it show last xdl opened?

I'd try removing that or un select any open xdl's first.

Not sure as I'm not an expert by any means!

[vnsswithcam]

nah it cant be i havent logged on this laptop at all ive got another laptop that i data log with but im setting up this one to log and still nothin?

[Holden202T]

i'd try deleting the tp5 config files and see if that helps, cause i think when you remove it they stay there!

[vnsswithcam]

ok deleting config files didnt work but ive found an older version of tp5 5.0.6356.0 and installed that and boom its working like normal now?? no error message and i can see and use ose plugin now? i think im just going to use this setup until a newer version comes out my computer just doesnt want to agree with the latest version

[Holden202T]

so 7330 isn't working for you ?

[vnsswithcam]

it looks that way? i havent changed anything else on my laptop but the version of tp5?

[monaro308]

I've had the same problem too,a few weeks ago i asked a similar thing about the latest version and have had trouble with TP5 freezing up,or the bubble trace freezing in one spot.
Also rpm going crazy on dash display and bubble trace showing about 300rpm lower than actual rpm on the MAP display.

I haven't been playing since then as i put the boot into it on LPG and blew my masterpiece plenum box up like a balloon and blew the back panel away on the top and sides.
I thought my welds were suss but it showed a good 3/4 weld penetration.
Broke the welds clean.Everything was sealed too well.
Blew the VT rubber intake tube in bits,and blew the VN a/cleaner box off its clips.
The funniest part was because the air box is next to the LH guard it blew my Monaro badge clean off the guard,clips and all.
I noticed it the next day in the shed and thought "what the ? " and then worked it out.
I went for a walk where it happened and the badge was still on the side of the road.

I bent the back panel back as much as i could and used packing tape to seal it all and drive back home
First time in 3 years that its played up.

How do you post pics on here?

[antus]

Ahh man, sounds spectacular, but damn!

To post pics just attach them as files and they show in the thread.

[monaro308]

I bent it all back into shape and rewelded the back panel on.
This time i haven't done up the clamps as tight and left 3 clips on the airbox on.

[Holden202T]

thats one of the best efforts i've seen!