FX Holden Race Car Project

Post Your Delco Powered Ride Here
User avatar
Holden202T
Posts: 10435
Joined: Sat Feb 28, 2009 11:05 am
Location: Tenambit, NSW

Re: FX Holden Race Car Project

Post by Holden202T »

Got the rest of the parts i needed to complete this adjustable oil pressure do-dad.
1.JPG
2.JPG
This setting is af far out as the adjustment goes, and would put it on the original bolts collar, so theres plenty of room for adjustment, i've heard 2-3mm shims is what people put in them, so i have way more adjustment than that (not that i expect to need it)
3.JPG
in other news it looks like JE will only sell the pistons to Precision, and precision only sell the pistons in a set of six, so i've posted on every facebook group i am in to see if anyone has had to buy a set of six only for one or two of them, its a last ditch attempt to find singular parts!

failing that i'll be setting up a crowd funding option :lol:
You do not have the required permissions to view the files attached to this post.
Charlescrown
Posts: 2076
Joined: Fri Aug 05, 2011 9:58 pm
cars: V8 VR Commodore BT1
LB Lancer 2L turbo & Delco
Starion TBI with Delco
Mitsubishi Lancer EVO4 track car
NA MX5
3 vintage motor bikes
Location: Padstow NSW

Re: FX Holden Race Car Project

Post by Charlescrown »

Think of it this way. If you buy a set your then got spares for the (hope it never happens) next time. My guess is there abt $600 a set and the rods a similar price. Are you going to weld up the window or get another block?
User avatar
Holden202T
Posts: 10435
Joined: Sat Feb 28, 2009 11:05 am
Location: Tenambit, NSW

Re: FX Holden Race Car Project

Post by Holden202T »

the pistons retail for about $1k aus ... and the rods i think about $700 .... yes it would be nice to have spares for if anything happens again, but sure as shit it wont if i have spares on the shelf!

as for welding up a cast iron block .... i would have said its not worth the effort ? i have other blocks so my plan is to go with them.
User avatar
vlad01
Posts: 8550
Joined: Mon Oct 08, 2012 8:41 am
cars: VP I S
VP I executive
VP II executive
VP II executive #2
Location: Kyneton, Vic

Re: FX Holden Race Car Project

Post by vlad01 »

It will be very difficult repairing that block due to the way it was damaged. Maybe so if the case had a hole but the cylinder and water jacket got punched through so new block it is.
v6bucket
Posts: 769
Joined: Tue Jul 21, 2009 12:02 am

Re: FX Holden Race Car Project

Post by v6bucket »

It's not feasible to weld a cast iron block, alloy block is no problems.
"Definition of a Drag Racer: A person who spends money he doesn't have on parts he doesn't need to impress people he doesn't know." - Grumpy Jenkins----- Poverty---
User avatar
vlad01
Posts: 8550
Joined: Mon Oct 08, 2012 8:41 am
cars: VP I S
VP I executive
VP II executive
VP II executive #2
Location: Kyneton, Vic

Re: FX Holden Race Car Project

Post by vlad01 »

It is, but it's done by furnace brazing, not welding per say. Very few people can do it though and not worth it unless it's some super rare historical engine.
Macca97
Posts: 155
Joined: Wed Jan 07, 2015 3:21 am
cars: hj ute, hz wagon, copious amounts of random half started side projects
Location: Mid North Coast

Re: FX Holden Race Car Project

Post by Macca97 »

202s are still readily available, that poor block is just a conversation piece now. if you red low on blocks sam, ive got probably 10 red ones
why have one 202, when you can have 12 and counting, 30+ car graveyard just for fun aswell
User avatar
vlad01
Posts: 8550
Joined: Mon Oct 08, 2012 8:41 am
cars: VP I S
VP I executive
VP II executive
VP II executive #2
Location: Kyneton, Vic

Re: FX Holden Race Car Project

Post by vlad01 »

Plus, you can get billet 202 blocks these days :grin:
v6bucket
Posts: 769
Joined: Tue Jul 21, 2009 12:02 am

Re: FX Holden Race Car Project

Post by v6bucket »

vlad01 wrote:Plus, you can get billet 202 blocks these days :grin:
You can if you have a big enough bank balance.
"Definition of a Drag Racer: A person who spends money he doesn't have on parts he doesn't need to impress people he doesn't know." - Grumpy Jenkins----- Poverty---
User avatar
vlad01
Posts: 8550
Joined: Mon Oct 08, 2012 8:41 am
cars: VP I S
VP I executive
VP II executive
VP II executive #2
Location: Kyneton, Vic

Re: FX Holden Race Car Project

Post by vlad01 »

Prob would have bought a stage 2 alloy Buick block by now if it wasn't for the retarded wrong side starter location lol.