Enhanced Mod Custom Tunes

[Wade]

Try That XDF. But Yeah I haven't tested that table yet. I don't have a bench setup, so most things are tested on my own personal car.

[Kevspec]

Sorry what is changed in this xdf? Main thing I feel it needs is fueling vs coolant and the idle tables in park as atm it pulls about 10° from when it's in drive across the whole board

[Wade]

It’s a completely different xdf from what’s in the main files. I started from scratch again and have been slowly adding things in as I’ve been testing it on my car. So I’m fairly confident everything is correct. If you do find any issues, let me know. And if you want anything in particular added also let me know. The cylair idle table as far as I am aware is a 0-2 multiplier. Main table that seems to pull timing at idle is idle spark correction limit which is set around 5.27deg standard. So if your getting 10 deg at idle from a stock tune there might be something else.

[Kevspec]

Ok I will have a look over it thank you

[Wade]

Tables your after are maf transient fuel tables and p/n run time spark offset I think? Looks like that table removes 9.67 deg across the board when active

[Wade]

kevspec tables added in spark and maf folders.

[Wade]

If your having issues loading this xdf, you may need to update to the latest version of tunerpro rt

[The1]

thanks mate for your work, let us know when your polished ready to post in the main OP

[Wade]

Unless anyone wants anything else added then it’s done for now, and I can move onto the vx xdf.

[Rhysk94]

Yeah, can you add so it works with map sensors