VX ecotec won't hold first gear

darky82 · Post by **darky82** » Wed Nov 06, 2024 12:48 pm

I have set manual 1-2 upshift %tps vs kph table to 205.2 in all and the box still shifts into second gear when first is selected.
There are no other tables for manual shift.
What am I missing?

Wade · Post by **Wade** » Wed Nov 06, 2024 5:25 pm

Don’t think it’s manual. Pretty sure it’s hot

Knackersjewels · Post by **Knackersjewels** » Wed Nov 06, 2024 9:54 pm

I don't think vx xdf has all of the trans tables

immortality · Post by **immortality** » Wed Nov 06, 2024 10:32 pm

I was about to say the same thing, there are a number of items that need changing but not all will be defined in the XDF.

Post by **yoda69** » Wed Nov 06, 2024 10:56 pm

Post up the bin file you’re using and I’ll have a look.

Post by **Chr0m3** » Thu Nov 07, 2024 2:28 am

When I get home I'll upload the XDF I've edited the has the required variables.

darky82 · Post by **darky82** » Thu Nov 07, 2024 2:50 am

Thanks guys
i thought there might have been something missing as the VY had more definitions.
Also tried to write the enhanced bin to the PCM but i got a file type mismatch error when trying so i just used the factory bin a pulled.

Post by **yoda69** » Thu Nov 07, 2024 4:32 am

EDITED
Original information deleted as incorrect.

Correct change is:
To get the vehicle to hold first gear in D1 change $01 to $00 at $424F.

darky82 · Post by **darky82** » Thu Nov 07, 2024 4:36 am

Thanks mate but i got no idea how to do that

Wade · Post by **Wade** » Thu Nov 07, 2024 1:58 pm

low mode added

VX ecotec won't hold first gear

VX ecotec won't hold first gear

Re: VX ecotec won't hold first gear

Re: VX ecotec won't hold first gear

Re: VX ecotec won't hold first gear

Re: VX ecotec won't hold first gear

Re: VX ecotec won't hold first gear

Re: VX ecotec won't hold first gear

Re: VX ecotec won't hold first gear

Re: VX ecotec won't hold first gear

Re: VX ecotec won't hold first gear