You'll also need to do something similar to what I have been attempting here to get recovery flash working on E54. You'll likely need to init the whole platform by copying the boot code from a P59 bin.
viewtopic.php?p=132511#p132511
Reverse Engineering P59 HWID 12575502
- antus
- Site Admin
- Posts: 8988
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Reverse Engineering P59 HWID 12575502
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: Reverse Engineering P59 HWID 12575502
Me, motivated enough for all that? If Ghidra's emulator would work with it, maybe. I'm not fixing the missing instruction problem.
The datasheet for this one, you say?
But yeah, I'd BDM over everything.
My time is better spent coding from scratch for a Pi Pico. Wouldn't even get anywhere on that without ChatGPT; even then, progress is slow. Have to slowly walk it through what I'm going for, test, make revisions, test, try my best to interpret the code, test, guess what problems could arise, test.
Try to get it to do too much at a time and it's a mess.
Don't stress specific units.
Re: Reverse Engineering P59 HWID 12575502
Yeah, making something new is going much better so far.
https://www.youtube.com/watch?v=_ZkIpFpMpZ0
https://www.youtube.com/watch?v=_ZkIpFpMpZ0
Don't stress specific units.
- antus
- Site Admin
- Posts: 8988
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Reverse Engineering P59 HWID 12575502
Its good to see you making progress and learning along the way but note that this thread is about P59 hardware and OSID 12575502. Please keep this thread on topic.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396