Realtime VY Flash ECU - WORKING

[upyas]

I bricked a vy ecu with a little whoopsie and decided to remove the plcc32 chip and get a adapter so i can write the tune back on it with a eeprom burner

While it was apart I decided to try and get it working with a emulator, why not?

It works, no need to explain how it was done as you can see all in the video

ps ignore the bad supercharger screech, its just the belt, the car made over 210rwkw auto, 7psi Raptor supercharger, i tuned it flash not with the emulator

Going to keep this ecu for tuning and then writing the flash to the other ecu when done, getting the vx ecu done next.

Thanks Antus, VL, The1 and whoever else helped that i missed, you guys are fing legends, keep up the good work.

Going to play around with this on my vx, doing a rear mount turbo kit on it soon and was going to go after market ecu but I might just use the stock ecu now.

Cheers guys

[antus]

Top stuff, nice clean work and a great win! I knew this was possible, but it needs a tidy install just like that

[Rhysk94]

Wheres the video?
Also where can we get this!?

Sick of having to do flash after flash on the dyno

[Chr0m3]

Why edit the post to remove the video? I'm sure everyone is curious about how this works.

[upyas]

sorry, message me if you would like the video

[Ken]

Keen to know how you did it.

Did you interface the chip mount using this method.

XY_ECU_02.png

[antus]

It was like this, short leads viewtopic.php?p=24267#p24267

people later in that thread tried adapters, but its limited how much of that you can do before the signal integrity is too low as people report in the thread.

[Ken]

Ah yeah, I posted the 32pin dip & cable ebay link in that thread.

Didn't know the original poster here was using a Moates unit.

Whilst I'm here posting, has anyone seen one of these emulators yet, wondering if there's a way of making it work.

Edit: are the VY chips 256 or 512kb, I'm not at home to check just yet, unit in the link above is for 256kb.

[upyas]

Ah yeah, I posted the 32pin dip & cable ebay link in that thread.

Didn't know the original poster here was using a Moates unit.

Whilst I'm here posting, has anyone seen one of these emulators yet, wondering if there's a way of making it work.

Edit: are the VY chips 256 or 512kb, I'm not at home to check just yet, unit in the link above is for 256kb.

if anyone wants to buy one and send it to me I can test it with my ecu's

[antus]

bigger, 1024