Need help de pinning a VN V8 dizzy plug (loom side)

[Asho88]

Hey guys so I’ve had issues with my dizzy wires broke so I stupidly snipped them and crimped it dumb I know but was working until it wasn’t so now I need to de pin the dizzy plug and re pin it to get a fresh start with a new dizzy. Any pointers where is the locking tab? Does the plug come out from the top or the bottom? Cheers fellas

[brindo]

Is it possible to just buy a whole new connector and start again? Or is it more of a time thing?
Not 100% sure but I thought EFI Hardware sell them https://www.efihardware.com/products/34 ... 3-pin-plug
They would be worth a call.

[delcowizzid]

The locking tabs are down both side of each pin looking in from the dizzy side of the plug need a fork tool

[Asho88]

Yeah I stuffed it ordered a new plug from EFI HARDWARE lol cheers another question will a VS dizzy work with a VN computer looks like I can just swap plugs

[brindo]

VS Series 1 and 2 should be the same except as you mentioned for the plug.
If you were in a bind, theres nothing stopping you soldering on some longer wires to the dizzy and using a generic 3 pin waterproof plug.