Re: Hybrid Flash ECOTEC PCM ONEROM-ESP32S3 Flash tool

Programs / Tools / Scripts
User avatar
Rapidfire
Posts: 66
Joined: Sun Oct 18, 2026 9:56 am
cars: Vp Group A Rep
Ve 6.0 Lsa 6 speed Ute
Vf Redline Wagon
L300 Van with 3.8 Buick

Re: Re: Hybrid Flash ECOTEC PCM ONEROM-ESP32S3 Flash tool

Post by Rapidfire »

Muncie wrote: Mon Nov 09, 2026 7:43 am Im aiming to have Wifi to laptop as well and this ESP32 has it but my intention is to just have the Dash fitted permanently in car as my gauges logging and map selector. When i want to tune will hook up over wifi and do it there with ESP32 providing the connection the dash and Onerom will have a single USB C connection between them.

The testing of non ALDL logging is going ok and indeed works but needs some bugs sorted out can indeed deliver far higher logging speeds but i need to not have everything going flat out i dont need battery voltage at 20hz for example so ALDL can just be for the car. Currently ALDL and Rom bus logging can run concurrently i think i need to get the timing better to address the stalling.
Thanks for idea, I hadn't thought of tune selector. Ive used usb function to do both modes you can select tunerpro bridge or sd tune selector, can only run one or other not both at same time
select tunerpro bridge and you connected wired or wireless to fire onerom, Via tuner pro rt on laptop
select sd tune selector and you can select up 64 tunes, Ive made it auto select fire 28a or c to 32a or b and it locks out 28pin bins in 32pin mode, vice versa
In 32pin mode u can up load cal only not hole tune so car can select map while still running, dont have to restart car. you have to keep to same os or it will lock tune out so you cant, over lap with another os cal file.
P-4 is set to moates normal DT mode there is no ALDL function
You do not have the required permissions to view the files attached to this post.
User avatar
Rapidfire
Posts: 66
Joined: Sun Oct 18, 2026 9:56 am
cars: Vp Group A Rep
Ve 6.0 Lsa 6 speed Ute
Vf Redline Wagon
L300 Van with 3.8 Buick

Re: Hybrid Flash ECOTEC PCM ONEROM-ESP32S3 Flash tool

Post by Rapidfire »

I just want to point out that jxx moates plugin was not finished code, he got plugin form Honda forum. someone took out part of code for it to fit fire onerom plugin, for Honda`s
It was never complete firmware

Then when jxx found it he did his own adapt for ALDL to ECU plugin.

Ive had to complete the missing code for whole firmware to work perfectly, then compressed it. For it to fit

Only to find out that we didnt need that part of the ALDL plugin

Esp32 Board Bridged that part of the ALDL thats no longer needed on fire onerom`s ALDL

You can still use ALDL on fire onerom`s firmware, as long as you got right hardware to connect it to ECM-PCM, That`s hard wired to board.

Then there`s no need for OBDX pro gt Bluetooth connection

I haven't started on fire onerom`s usb to Bluetooth or Wifi adapter, that would make Esp32 completely wireless connectivity, no cables need to change you tune on the fly

In time could evolve into a wireless handheld controller were you could change spark map, Volumetric Efficiency (VE) and so on
User avatar
Muncie
Posts: 249
Joined: Wed Dec 02, 2020 6:15 am
cars: Vy commodore, Turbo Ecotec v6
Location: New Zealand Waikato

Re: Hybrid Flash ECOTEC PCM ONEROM-ESP32S3 Flash tool

Post by Muncie »

Using the ESP32 AS a flash controller is bloody brilliant gets around all the usual pain in ass things about using a laptop you cant put an incorrect file in as you only have whats there to choose from excellent for my teenage son he either wants all the noise or all the economy.

Plugging in the handset is no problem and bumping a bin in is easy enough too theres nothing else to confuse things.