newbie - 12p tune - Knock sensor not working...

[Jayme]

nah you dont tell him what number you are looking for lol he'll just say "sure its 1F" just ask him for the serial number on it.

[vn5000]

Yeah ,good point jayme,most of them ebay memcal sellers cant be trusted.

[SirGollum]

Well, ive asked him what the serial number is.....hopefully he will come back with the correct answer

[SirGollum]

Looed what turned up yesterday!, now just gotta get some time to fit it and figure out how to hook this up to the ecu.

[Holden202T]

SWEET!

what model device did you get ?

[SirGollum]

Its a LC-1, doesn't have any gauges or anything, but I figured that TP5 would display what I wanted.

[felsy]

nice, im still unsure what wideband afm to get,
good luck with your tuning, and how hare you going with your idle?

[SirGollum]

At a stand still its idling perfect at the moment, even during cold start, super happy with that! It does still 'dip' when coasting thou, but doesn't stall the engine, so im going to wind the throttle stop out a litte more until there's a few more IAC steps, and see if that helps things at all.

[Holden202T]

yeah lc-1 is fine for what you need, thats what i got first time round and did all i needed for $12P tuning!

[SirGollum]

Hi Guys!

Well, ive now got the Wideband installed and looks to be working well. As a experiment I enabled to Wideband VE learn and went for a quick drive, after a little while, it starting pinging......and then got worse and worse....So im assuming that the bad fueling (Seems to run at about 12.5ish on the WB) was hiding to much timing ? Does this sound about right ?

Soo....anyway, I re uploaded the bin before I set VE Learn, and alls good again. Im definatley on the hunt for knock sensor again now...

I did find this on ebay at the moment...

http://www.ebay.com.au/itm/VN-VP-V8-HSV ... 2a122c8fc2

Seems to be legit, and numbers seem to line up ok (https://pcmhacking.net/forums/view ... =20#p13685)

But the knock board doesn't seem to have a serial starting in "1F", so am unsure if this would work with the 12p tune ? Can anyone confirm or deny for me please ?


Slowly getting there!

Thanks

Glen