Hello,
I saw somewhere that vl400 revised the $11 xdf can any one point me to where i can find this?
I dont think it was $11p but just a more usable version of $11
OSE 12P V112
-
stevedarman
- Posts: 109
- Joined: Sat Mar 21, 2009 8:59 am
- cars: VX commodore
-
VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: OSE 12P V111
Either download the memcal ID tool .. https://pcmhacking.net/forums/viewtopic.php?f=3&t=905 or in the XDF thread .. https://pcmhacking.net/forums/viewtopic.php?f=7&t=5
-
Lawso
- Posts: 88
- Joined: Thu Oct 07, 2010 10:45 pm
- cars: VR Ute with VS V6 Getrag driveline
VE SSV Ute
VS Ute - Location: Campbelltown NSW
Re: OSE 12P V111
VL400,
top job once again with V111!
Got a few cars running on it and it's working great. The single XDF makes life easy as do the defined ADX files.
I noticed that earlier in the thread you were considering Alpha-N as an update?
A problem child has found it's way to me.... 8 throttle body 304 holden with a crappy driveline setup, wrong converter, wrong diff gears, etc. Basically all wrong!
It's been interesting getting it to semi work only seeing 90kpa and up!
Alpha-N would be handy.
top job once again with V111!
Got a few cars running on it and it's working great. The single XDF makes life easy as do the defined ADX files.
I noticed that earlier in the thread you were considering Alpha-N as an update?
A problem child has found it's way to me.... 8 throttle body 304 holden with a crappy driveline setup, wrong converter, wrong diff gears, etc. Basically all wrong!
It's been interesting getting it to semi work only seeing 90kpa and up!
Alpha-N would be handy.
-
delcowizzid
- Posts: 5632
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: OSE 12P V111
do you have a vacuam plenum joining all the runners into one map hose it seems to work very good once you get the volume correct
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
-
VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: OSE 12P V111
Alpha-N is still on the to-do list sorry 
-
Lawso
- Posts: 88
- Joined: Thu Oct 07, 2010 10:45 pm
- cars: VR Ute with VS V6 Getrag driveline
VE SSV Ute
VS Ute - Location: Campbelltown NSW
Re: OSE 12P V111
No worries mate, just thought I'd check.
Yep, all 8 throttles run to a common plenum. I'm pretty sure his cam timing is way off, just got to convince him to let me check it!
Yep, all 8 throttles run to a common plenum. I'm pretty sure his cam timing is way off, just got to convince him to let me check it!
-
stevedarman
- Posts: 109
- Joined: Sat Mar 21, 2009 8:59 am
- cars: VX commodore
Re: OSE 12P V111
I have just converted my VR v6 to manual and rewired to suit 808 ceu
and loaded the $12 program The car wont start with vats turned on.
It is set for VR. With the anti theft turned off it starts and runs ok
But has a 1-2 second delay from moving the key from start to the starter to start cranking
Is there something i should know here?
and loaded the $12 program The car wont start with vats turned on.
It is set for VR. With the anti theft turned off it starts and runs ok
But has a 1-2 second delay from moving the key from start to the starter to start cranking
Is there something i should know here?
-
delcowizzid
- Posts: 5632
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: OSE 12P V111
the 808 doesnt have the output for security just leave it turned off
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Re: OSE 12P V111
its no problem, when you hit the starter, the BCM is asking for the ECU to respond to its VATS data packet and when the ecu doesnt respond, it just goes fuck it and starts anyway, thats why the delay.
-
VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: OSE 12P V111
And to get rid of the delay and have VATS working can install one of these in your '808 .. https://pcmhacking.net/forums/viewtopic.php?f=14&t=398