Converting from Kal to TP5

[gmh265]

Ok,

Have managed to suck the binfile out of my chipT memcal using Vl400's flash tool (awesome!)

Now here is where I get stuck. using The1's memcal id tool (awesome again!) I get this (attached image)

So I go to the VS v8 tab in the id tool to get the xdf, however there is no xdf in the $5A folder, there is a .ecu file though? whats that?

Any ideas on where to go from here? I did open the bin using the ose .xdf and It looks like some stuff is correct but its definitely not all good.

cheers!

[gmh265]

Here is the bin just in case..

[VX L67 Getrag]

ecu file is tuner pro old type of xdf, you can go to the tab & open ecu file & convert to xdf!

[gmh265]

Thanks VX, just worked that one out!

COmparing my BIN to a BLJX6413 is looking good, a lot of the values are identical.

I will keep playing.

Is there any way in TP to highlight or mark the changes between the loaded bin and the compare bin (lie in motec software?)

cheers

[Holden202T]

in the tools menu there is a difference tool that allows you to display which tables differ.

[Dylan]

Yeah, I started out on kalmaker sp3 too, before meeting some of the other admins here and deciding we had the skills between us to create something better and more modern

This is my spreadsheet for converting sp3 sized VE tables to 12p. It may come in useful together with the sp3 xdf.

The hardware is compatible.

Sorry to dig up an old thread, i am also moving camp from kalmaker (i'm finding it hard to set up TP5)
I noticed you have that SP3 converter, How could i go about doing it with a SP2 tune?

[antus]

If its a kalmaker N00 then grab the N00 xdf from here under kalmaker, and use that to read the bin. https://pcmhacking.net/forums/view ... hp?f=7&t=5

[Dylan]

Stupid me actually posted before I looked at it, I have a SP2 tune but I have SP3 software. I had my car dyno tuned but I didnt bring my laptop because the shop had SP3 but on the day that laptop was stuffed so he dragged out another with SP2 installed. Any way we can suck that out of the ecu?

[Holden202T]

if you have the interface and everything to talk to your car you should be able to get the tune out of it.

i'm not sure if VL400's flashtool will detect kalmaker but i think it does.

[VL400]

The flashtool will detect an SP3 bin, I dont know about other kal bins and how they will identify themselves. You should e able to read it through the custom memory mapping option if it cant ID the device.