VR Manual ECU wanted

DieselBob · Post by **DieselBob** » Tue Jul 12, 2011 7:40 am

Ok I've been looking for a cheap VR 16183082 manual ECM...
I want to have a look at OSE 12P... so far they are either not available
or they want to much

....
If anyone knows a good way to get a cheap one I'd appreciate any help.

Bob

Post by **VL400** » Tue Jul 12, 2011 7:51 am

Cheap and '3082 dont normally go together

Can convert an 808 to do the same job for cheap though .. https://pcmhacking.net/forums/viewtopic.php?f=14&t=398

If you dont want it for a VR/VS vehicle just convert an 808 to 8192baud with a USB board.

DieselBob · Post by **DieselBob** » Tue Jul 12, 2011 9:14 am

Yeah I've got plenty of 808's

Started looking for a 3082 and got a bit of a shock at how "rare" they are...
Not many manual VR's

local wrecker who's been kind in the past
with ECM's of various descriptions said mostly Ute's....
Kinda hoped there was a hidden supply hiding somewhere

Oh Well I'll keep my eyes open

Post by **Jayme** » Tue Jul 12, 2011 9:36 am

no need to keep eyes open, follow vl400's link, and the emulator board will transform an 808 into a 082 for $50. done

DieselBob · Post by **DieselBob** » Mon Jul 18, 2011 10:50 am

Had a look at the pinouts.
Same config as an 808 less the serial data pin.

I'm thinking that the only real differance would be the CAN data circuit.
So no good for a vehicle with multiple Controllers on the same network....
Cause comms errors and VATS probs as well....

Only good for VN - VQ
and projects....
Correct me if i'm wrong.....

Post by **VL400** » Mon Jul 18, 2011 11:42 am

The '3082 is basically an '808 with the ALDL data chip. The SXR emulator board emulates that missing chip providing the one wire ALDL bus - VATS then works fine with it, just like a real '3082. The only disadvantage of a SXR board equipped '808 is your pockets will be much heavier than if you managed to buy a '3082.

DieselBob · Post by **DieselBob** » Mon Jul 18, 2011 12:09 pm

thankyou

just what i wanted to here

js1973 · Post by **js1973** » Mon Jul 18, 2011 10:31 pm

Heres one http://www.ebay.com.au/itm/VR-V6-MANUAL ... 415b8ccc3e

Post by **Holden202T** » Tue Jul 19, 2011 4:23 am

lol they arn't cheap hey!

DieselBob · Post by **DieselBob** » Tue Jul 19, 2011 10:03 am

I've gotten VN to VS ecm's for $30 got a shock when none of the local wreckers had any..
Asked the price if they had one and he said $150...
Looked on eBay and there was one for $195....
For what I'm doing not worth the outlay...

Yeah they ain't cheap

VR Manual ECU wanted

VR Manual ECU wanted

Re: VR Manual ECU wanted

Re: VR Manual ECU wanted

Re: VR Manual ECU wanted

Re: VR Manual ECU wanted

Re: VR Manual ECU wanted

Re: VR Manual ECU wanted

Re: VR Manual ECU wanted

Re: VR Manual ECU wanted

Re: VR Manual ECU wanted