Help with setting up

darky82 · Post by **darky82** » Mon Jul 25, 2011 4:36 am

Hi all, could some one give me a hand please to set up my laptop to run tuner pro rt v5, i have looked at the getting started post and still dont know were to start with files and things like that, i have my usb interface, and tuner pro. I have a holden vs 5.0L statesman that i want to have a look at. if some one has the time to run me through the right files to download and set up, getting confussed with file types. Cheers

Post by **antus** » Mon Jul 25, 2011 4:39 am

You should only need tunerpro and the right ADX file for logging. That will be different depending on auto or manual, there is a different one for each. Dont use the plugin.

Post by **VL400** » Mon Jul 25, 2011 5:40 am

Have you read/tried the "TunerPro Getting Started Guide" towards the end of the ALDL basics information thread? https://pcmhacking.net/forums/view ... f=10&t=219

VX L67 Getrag · Post by **VX L67 Getrag** » Mon Jul 25, 2011 6:35 am

I Just went to that forum & made a copy in word!

Although I pretty well have it all sorted I like to have reference material to always look back on!

It's attached if anyone else wants it!(pretty basic & good read!)

darky82 · Post by **darky82** » Tue Jul 26, 2011 11:24 am

Ok cool getting there but now i have problem with tunerpro not finding hardware, usb shows up in devices and printers in unspecified and is found and functional in tunerpro. Do i have the wrong XDF file?

Post by **antus** » Tue Jul 26, 2011 1:53 pm

You need to be connected to your car, have the right com port selected, and have the car 'on' (engine can be running, but does not need to be). Also when logging only it will never say hardware found. That referrs to the realtime emulation hardware. If you only want to logging hit the "aquire data" button.

darky82 · Post by **darky82** » Thu Jul 28, 2011 8:34 am

Ok, the definition i got from tunerpro and its an ecu file, and i cant find the right adx on here?

Aslo tunerpro is saying TBD for an ALDL definition whats that mean?

Post by **antus** » Thu Jul 28, 2011 9:07 am

Go back a few steps.. You need to ID the chip in your car (for editing) but dont need to for logging. Get The1s tool here:

https://pcmhacking.net/forums/view ... ?f=3&t=905

Use that to see what adx file you need for vs v8, and the adx file should be included.

ecu files are waaaaaay old, so throw that in the bin. How do you plan to edit the bin? You'll need to at a minimum have a look at the 4 letter code on the memcal, then you can look that code up in the tool above and see which xdf to use to edit it. Latest version will be included with the tool.

darky82 · Post by **darky82** » Thu Jul 28, 2011 10:14 am

I only want to log, check for faults and see engine data

Thanks

Post by **VL400** » Thu Jul 28, 2011 11:16 am

For a VS V8 you can use the ADX called "VR_$11_v1.04-tp5.zip" from here .. https://pcmhacking.net/forums/viewtopic.php?f=10&t=29

Help with setting up

Help with setting up

Re: Help with setting up

Re: Help with setting up

Re: Help with setting up

Re: Help with setting up

Re: Help with setting up

Re: Help with setting up

Re: Help with setting up

Re: Help with setting up

Re: Help with setting up