at29f040b plcc in place of 27c512 plcc

jezza351 · Post by **jezza351** » Mon Aug 22, 2011 6:47 am

Hi guys, anyone know how i could put a at29f040b 32pin plcc flash chip in place of a 27c512 32pin plcc eprom and make it work?
will i need to run wires on the board ?
Thanks guys

Post by **Holden202T** » Mon Aug 22, 2011 9:54 am

yeah either that or you'd need to make some sort of adaptor board for it .... probably not really worth the effort....

Post by **festy** » Tue Aug 23, 2011 3:16 am

I wouldn't bother trying - of the 32 pins, 28 of them would need swapping

Are you looking to get more capacity, or just upgrading to flash?

jezza351 · Post by **jezza351** » Wed Aug 24, 2011 12:27 pm

yeah trying to upgrade to flash, i will see if i can find a sst27fs512 plcc somewhere, should do the trick

vn5000 · Post by **vn5000** » Wed Aug 24, 2011 12:34 pm

Moates still sell sst27sf512 dip which is what you want .It drops straight in ,no fucking around.

jezza351 · Post by **jezza351** » Thu Aug 25, 2011 9:25 am

Ok, are they 32pin plcc ?

Post by **yoda69** » Thu Aug 25, 2011 9:35 am

http://www.moates.net/c2-sst-27sf512-ch ... l?cPath=26

28Pin DIP, why do you want PLCC?

What ECU are you working on that has a 512 PLCC?

jezza351 · Post by **jezza351** » Thu Aug 25, 2011 11:18 am

haha dont laugh, its a hyundai excel

Post by **festy** » Thu Aug 25, 2011 11:29 am

There's plenty on ebay, like these ones.

vn5000 · Post by **vn5000** » Thu Aug 25, 2011 11:35 am

Lol ,i thought you were talking about an 808 .

at29f040b plcc in place of 27c512 plcc

at29f040b plcc in place of 27c512 plcc

Re: at29f040b plcc in place of 27c512 plcc

Re: at29f040b plcc in place of 27c512 plcc

Re: at29f040b plcc in place of 27c512 plcc

Re: at29f040b plcc in place of 27c512 plcc

Re: at29f040b plcc in place of 27c512 plcc

Re: at29f040b plcc in place of 27c512 plcc

Re: at29f040b plcc in place of 27c512 plcc

Re: at29f040b plcc in place of 27c512 plcc

Re: at29f040b plcc in place of 27c512 plcc