I don't suppose anyone has the 92118885 bin with the eprom area not cleared?
Cheers VX L67 Getrag
VY Auto Bin Files
-
VX L67 Getrag
- Posts: 2971
- Joined: Sun Aug 02, 2009 11:16 am
- Location: Bayside, Melbourne, Victoria
-
darcy
- Posts: 120
- Joined: Fri May 22, 2009 12:28 am
Re: VY Auto Bin Files
My car is a 92118883 if that would help.
I have 92161296 completete too from my donor PCM
What do you want the eeprom data for...
I have 92161296 completete too from my donor PCM
What do you want the eeprom data for...
-
VX L67 Getrag
- Posts: 2971
- Joined: Sun Aug 02, 2009 11:16 am
- Location: Bayside, Melbourne, Victoria
Re: VY Auto Bin Files
Hey Darcy,
Yeah I've got a few pcm's & bin's but not the one mentioned!
I am just doing a few compatibility test & a vy with 92118883 cant go backwards with a VX bin it will run o.k. for 10 seconds but warning comes on dash with service engine oil, then service transmission & then LPG starts flashing(neither tunes or car is on LPG) & cuts to 4 or 5 cyls & I shut it down!
I just wanted to see if it was forward compatible?
Even if anyone has the full row of eeprom data info for the 92118885 I can put it in the bin I have without it & it should work!
Cheers VX L67 Getrag
Yeah I've got a few pcm's & bin's but not the one mentioned!
I am just doing a few compatibility test & a vy with 92118883 cant go backwards with a VX bin it will run o.k. for 10 seconds but warning comes on dash with service engine oil, then service transmission & then LPG starts flashing(neither tunes or car is on LPG) & cuts to 4 or 5 cyls & I shut it down!
I just wanted to see if it was forward compatible?
Even if anyone has the full row of eeprom data info for the 92118885 I can put it in the bin I have without it & it should work!
Cheers VX L67 Getrag
-
yoda69
- Posts: 1226
- Joined: Sun Mar 15, 2009 12:20 am
- cars: 2004 VYII Acclaim Wagon V6 Auto LPG/Petrol
2004 VYII Berlina sedan V6 Auto
2005 VZ Monaro CV8 manual - Location: Geelong, VIC
Re: VY Auto Bin Files
Think your problem will be to do with the PCM Chatter on the bus to the BCM & Instruments.
Much the same as there is a flag for VX/VY serial on the L67 bins so the same code could be used on both, don't know if this was done on the VX/VY flash PCM's though
yoda69
Much the same as there is a flag for VX/VY serial on the L67 bins so the same code could be used on both, don't know if this was done on the VX/VY flash PCM's though
yoda69
-
VX L67 Getrag
- Posts: 2971
- Joined: Sun Aug 02, 2009 11:16 am
- Location: Bayside, Melbourne, Victoria
Re: VY Auto Bin Files
Just re-asking the question again as it seems the 92118885 is an update for most VY auto's pre underfloor cat's!
I know there is 1 on the memcalid tool so it's out there but that version has eeprom area ff'd out so it's un useable, I have copied the differences accross to 92118883 but not sure if theres a program update out of the cal area!
I know there is 1 on the memcalid tool so it's out there but that version has eeprom area ff'd out so it's un useable, I have copied the differences accross to 92118883 but not sure if theres a program update out of the cal area!