corrupted nvram

General Tuning Questions And Discussions
User avatar
Holden202T
Posts: 10394
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: corrupted nvram

Post by Holden202T »

holden08 wrote:so i just leave ignition on when i do that dont have car running
you can have the engine running or not, it doesn't matter.
holden08
Posts: 174
Joined: Wed Jun 16, 2010 7:17 pm
Location: kempsey nsw

Re: corrupted nvram

Post by holden08 »

the engine light is on
User avatar
Holden202T
Posts: 10394
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: corrupted nvram

Post by Holden202T »

the engine light will be on when the engine is not running but the ignition is on
holden08
Posts: 174
Joined: Wed Jun 16, 2010 7:17 pm
Location: kempsey nsw

Re: corrupted nvram

Post by holden08 »

yea it stays lit when the engine i running
User avatar
Holden202T
Posts: 10394
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: corrupted nvram

Post by Holden202T »

well a log will give you the answer to that aswell in the malfunction flags section.
User avatar
TTVN
Posts: 194
Joined: Tue Jun 30, 2009 10:01 pm
cars: TT 355 VN, Rearmount turbo 355 vp, cammed 355 hj60 landcruiser, vx clubby n efilive VZ ls1 wagon

Re: corrupted nvram

Post by TTVN »

engine light is possibly if you have not changed knock sensor back to the early style
User avatar
Jayme
Posts: 2585
Joined: Sun Mar 01, 2009 8:59 am
Location: North Coast, NSW

Re: corrupted nvram

Post by Jayme »

the engine light is just coz of the coolant temp sensor. have you swapped the sensor to buick cts? they are different.
holden08
Posts: 174
Joined: Wed Jun 16, 2010 7:17 pm
Location: kempsey nsw

Re: corrupted nvram

Post by holden08 »

changed the knock sensor i changed the temp sensor the one that has to wires
User avatar
Holden202T
Posts: 10394
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: corrupted nvram

Post by Holden202T »

well if you have the right sensor in there you might have a wiring issue..... also i've seen the plugs sometimes get a bit dodgy and the pins push out the back of it when you connect it to the sensor.
holden08
Posts: 174
Joined: Wed Jun 16, 2010 7:17 pm
Location: kempsey nsw

Re: corrupted nvram

Post by holden08 »

fixed nvram issue i had the wires around the wrong way the injectors had contant power and ecu had the switched power all good now :)
Post Reply