Using KalMaker Workshop

[delcowizzid]

i just read on the other forum about the 70mm maf if you havnt set up the maf scaler tables too suit she will run pretty bad have you messed with them yet

[VX L67 Getrag]

Hey Delcowizz,

I just got told by Alan about the afm's also, but no I haven't changed them & I don't know where to.... any help?

[delcosmurf]

MAF scaler tables are VAR:AIR:MAR 1 MAR 2 MAR 3 MAR 4 MAR 5 ETC its MAF frequency V's airflow/airmass with a bigger MAF they all need lowering open a larger maf bin that matches your MAF size and copy the tables over

[delcowizzid]

ah yeah she wont go too well with incorrect maf tables now that the smurf has pointed you in the right direction undo any changes to fueling in the tune and adjust the maf scalers to get fueling pretty good over the board

[VX L67 Getrag]

Thanks DelcoSmurf,

But I don't have a larger maf bin, as when you buy kalmaker it only comes with a certain amount of bins for the program you purchase & the W53 I'm pretty sure are all the standard v6 maf's, I will check tho & apart from that if the bin's aren't registered with the copy I bought I can't open them!
I did just purchase Tuner pro RT & I'm waiting on the ALDU1 cable I think it is & then I can play with that sort of stuff I think, I had a quick play with it last night & confused me even further....
SHould I open another bthread for tuner pro help or what is the go with opening a bin file then you also have to open a xdf?
But anyway I will check about copying maf tables, thanks for the variables!!!

Thanks heaps eveyone it's a real help!!!!

[delcosmurf]

for 74mm 8Khz bins its like this roughly so somewhere in between these and stock will get you close

VAR:AIR:MINFRQ........1808
VAR:AIR:OFS1...........3.348
VAR:AIR:FAC1...........0.027
VAR:AIR:MAR1
[hertz] [0:255 gps]
[ 0] 5
[ 128] 23
[ 256] 44
[ 384] 68
[ 512] 94
[ 640] 122
[ 768] 154
[ 896] 187
[1024] 222
VAR:AIR:OFS2..........9.375
VAR:AIR:FAC2 ......... 0.043
VAR:AIR:MAR2
[hertz] [0:255 gps]
[1024] 1
[1152] 26
[1280] 52
[1408] 79
[1536] 109
[1664] 142
[1792] 178
[1920] 215
[2048] 251
VAR:AIR:OFS3 ........19.531
VAR:AIR:FAC3 ........ 0.074
VAR:AIR:MAR3
[hertz] [0:255 gps]
[2048] 9
[2176] 37
[2304] 61
[2432] 88
[2560] 115
[2688] 145
[2816] 181
[2944] 219
[3072] 251
VAR:AIR:OFS4..........37.500
VAR:AIR:FAC4 ..........0.105
VAR:AIR:MAR4
[hertz] [0:255 gps]
[3072] 6
[3200] 33
[3328] 62
[3456] 90
[3584] 123
[3712] 155
[3840] 185
[3968] 223
[4096] 253
VAR:AIR:OFS5.........63.559
VAR:AIR:FAC5.......... 0.156
VAR:AIR:MAR5
[hertz] [0:255 gps]
[4096] 4
[4224] 29
[4352] 54
[4480] 80
[4608] 111
[4736] 141
[4864] 175
[4992] 210
[5120] 237
VAR:AIR:OFS6..........99.555
VAR:AIR:FAC6 ...........0.207
VAR:AIR:MAR6
[hertz] [0:255 gps]
[5120] 5
[5248] 36
[5376] 63
[5504] 92
[5632] 121
[5760] 158
[5888] 185
[6016] 218
[6144] 253
VAR:AIR:OFS7.........149.426
VAR:AIR:FAC7............0.262
VAR:AIR:MAR7
[hertz] [0:255 gps]
[6144] 8
[6272] 35
[6400] 64
[6528] 92
[6656] 122
[6784] 152
[6912] 185
[7040] 220
[7168] 251
VAR:AIR:OFS8..........213.535
VAR:AIR:FAC8 ............0.316
VAR:AIR:MAR8
[hertz] [0:255 gps]
[7168] 5
[7296] 35
[7424] 66
[7552] 94
[7680] 126
[7808] 161
[7936] 189
[8064] 223
[8192] 254

[VX L67 Getrag]

WOW!!!!

You are a f***ING Legend thanks so much!!!!

I'll get on to it, open up a stock bin again change these & then mask all the trans faults & split the difference, is the frequency the same on the maf's as I noticed you said that 1 was 8khz.

THANKS SO MUCH!!!!

[VX L67 Getrag]

OH!

I just found out I have another extra 2 lots of frequency's than that, they go up to 10240 hertz, I guess I'll just have to guess for these!

THANKS HEAPS AGAIN!!!

[delcosmurf]

it is for un-modified stock hz bins sum bins have extended frequency look up routines that goto 10Khz not 8Khz i have no idea what your bin you are using is.mask all the error codes again and maybe do the ips spark change again too if it helped the fluctuating idol advance.also FUL:OUT:INJRAT is your injector size variable i think i saw you asking about that somewhere

[delcosmurf]

74mm 10khz bins no idea what the offsets for it should be if there is any never used 10khz bins or VT ones before.but that has no effect on the maf a 74mm in vs or vt both have the same output v's flow coming from the maf


VAR:AIR:MINFRQX 1808
VAR:AIR:MARX0
[hertz] [0.000:512.000 gps]
[ 0] 3.406
[ 128] 3.977
[ 256] 4.594
[ 384] 5.250
[ 512] 5.969
[ 640] 6.742
[ 768] 7.578
[ 896] 8.477
[1024] 9.445
VAR:AIR:MARX1
[hertz] [0.000:512.000 gps]
[1024] 9.445
[1152] 10.492
[1280] 11.617
[1408] 12.828
[1536] 14.125
[1664] 15.516
[1792] 16.992
[1920] 18.578
[2048] 20.266
VAR:AIR:MARX2
[hertz] [0.000:512.000 gps]
[2048] 20.266
[2176] 22.063
[2304] 23.969
[2432] 26.000
[2560] 28.141
[2688] 30.414
[2816] 32.813
[2944] 35.344
[3072] 38.023
VAR:AIR:MARX3
[hertz] [0.000:512.000 gps]
[3072] 38.023
[3200] 40.844
[3328] 43.805
[3456] 46.930
[3584] 50.195
[3712] 53.617
[3840] 57.219
[3968] 60.977
[4096] 64.906
VAR:AIR:MARX4
[hertz] [0.000:512.000 gps]
[4096] 64.906
[4224] 69.016
[4352] 73.305
[4480] 77.781
[4608] 82.438
[4736] 87.289
[4864] 92.344
[4992] 97.594
[5120] 103.047
VAR:AIR:MARX5
[hertz] [0.000:512.000 gps]
[5120] 103.047
[5248] 108.719
[5376] 114.609
[5504] 120.703
[5632] 127.023
[5760] 133.578
[5888] 140.352
[6016] 147.367
[6144] 154.617
VAR:AIR:MARX6
[hertz] [0.000:512.000 gps]
[6144] 154.617
[6272] 162.117
[6400] 169.867
[6528] 177.859
[6656] 186.117
[6784] 194.633
[6912] 203.406
[7040] 212.453
[7168] 221.773
VAR:AIR:MARX7
[hertz] [0.000:512.000 gps]
[7168] 221.773
[7296] 231.367
[7424] 241.242
[7552] 251.406
[7680] 261.859
[7808] 272.609
[7936] 283.656
[8064] 295.000
[8192] 306.656
VAR:AIR:MARX8
[hertz] [0.000:512.000 gps]
[8192] 306.656
[8320] 318.625
[8448] 330.922
[8576] 343.523
[8704] 356.453
[8832] 369.711
[8960] 383.305
[9088] 397.227
[9216] 411.492
VAR:AIR:MARX9
[hertz] [0.000:512.000 gps]
[ 9216] 411.492
[ 9344] 426.109
[ 9472] 441.070
[ 9600] 456.383
[ 9728] 472.055
[ 9856] 488.086
[ 9984] 503.383
[10112] 511.992
[10240] 511.992