vt 10psi turbo memcal
-
- Posts: 7
- Joined: Wed May 25, 2011 4:04 pm
- cars: vr clubsport, 91 v6 ecotec vitara
vt 10psi turbo memcal
hi i have a vt 3.8 ecotech with the vt 4l60e auto powered vitara comp 4x4 that i am turboing, the turbo is a gt3582, i'v read that for better performance to run a ls1 air flow meter, is this true? at the most i want to run 10psi, i have a rising rate fuel pressure reg if i need it and was going to use 36lb injectors, at the moment i have a standard vt memcal with the vats removed because im running a standalone harness, is anyone able to do a memcal for me? and any advice on set up would be apreciated. Also should the maf go before the turbo or before the throtle body (after turbo).
cheers, nathan
cheers, nathan
-
- Posts: 440
- Joined: Sun Mar 22, 2009 11:52 am
- cars: VT V6 supercharged in a corolla
- Location: Sydney
- Contact:
Re: vt 10psi turbo memcal
The maf should go in the bin. Where are you located? Will help to find some tuner in your area.
-
- Posts: 7
- Joined: Wed May 25, 2011 4:04 pm
- cars: vr clubsport, 91 v6 ecotec vitara
Re: vt 10psi turbo memcal
Lol, I live in Rockhampton
-
- Posts: 2910
- Joined: Sun Aug 02, 2009 9:16 pm
- Location: Bayside, Melbourne, Victoria
- Contact:
Re: vt 10psi turbo memcal
I think THE1 may be somewhere around that area, but my geography isn't the best so I could be wrong!
Even if not he does a GREAT supported mail order type tuning!
Even if not he does a GREAT supported mail order type tuning!
Re: vt 10psi turbo memcal
MAF will be fine in either push or pull airflow, but before the TB is best for response.
Rocky is a fair way from me lol! Toowoomba
Kojab, let me know where your bin is.
Rocky is a fair way from me lol! Toowoomba
Kojab, let me know where your bin is.
-
- Posts: 2910
- Joined: Sun Aug 02, 2009 9:16 pm
- Location: Bayside, Melbourne, Victoria
- Contact:
Re: vt 10psi turbo memcal
LOL I think Rocky is closer to you than me.... ha ha
Yeah I wouldn't mind having a poke through kojab's bin too with the new enhanced files why pay for kalmaker credits?
Yeah I wouldn't mind having a poke through kojab's bin too with the new enhanced files why pay for kalmaker credits?
-
- Posts: 199
- Joined: Wed Nov 09, 2011 5:35 pm
- cars: Vt v6 wiith a gt35/40 turbo e85 399rwkw
Mazda e2000 with a cammed vx ecotec motor - Location: Victoria
Re: vt 10psi turbo memcal
Also the option of 808 maffless seing as though its a conversion, easier to tune imo
-
- Posts: 2910
- Joined: Sun Aug 02, 2009 9:16 pm
- Location: Bayside, Melbourne, Victoria
- Contact:
Re: vt 10psi turbo memcal
I thought there's no easy way to run the 4L60E with an 808 conversion?
Re: vt 10psi turbo memcal
few hundred for a manualized valve body will do it.
- Holden202T
- Posts: 10330
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: vt 10psi turbo memcal
vr auto tune would work for that and is map based ....
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread