VN Production Saloon
- Holden202T
- Posts: 10394
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: VN Production Saloon
shes looking nice mate, good work!
No matter what the question is, the answer is always more horsepower! 
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread

Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
-
- Posts: 345
- Joined: Sun Apr 05, 2009 1:07 pm
- cars: VN V6 Production Saloon
- Location: Gisborne NZ
Re: VN Production Saloon

This season we have two new trophys up for grabs, one each for Front & Rear wheel drives so its going to be interesting, theres a proviso that trips to the tower & penaltys applied will lose you marks towards these new trophys so i might have to pull my head in a bit

Main1: Grid lucky 13;
No complaints starting at the back considering the car hadn't done a lap yet. Got through the pit gate - waited till i had it pointed at the back straight and wound it up


A gap appeared between a couple of cars in front of me when the light went green and i just slammed the pedal down and it hooked up and shot through unscathed -



Managed to avoid and more damage that race, had a few good battles and several moments where i had to take evasive action to avoid banging into other cars not aware of me coming through ( i hope thats true ) and finished sixth or seventh, happy enough with that.
Build it, Race it, Break/Bend it ; Repeat.
-
- Posts: 345
- Joined: Sun Apr 05, 2009 1:07 pm
- cars: VN V6 Production Saloon
- Location: Gisborne NZ
Re: VN Production Saloon
Main2: Grid 7;
The grid draw was definitely not in my favour, lost a few spots and passed a few cars. I had an epic battle for several laps with the Skyline, the car was pretty good for most of the race but started 'going away' from me towards the end, squirming around and sliding more, tyre pressure adjustments should help but i really need a couple of new tyres. Finished sixth
Feature: Grid 6;
Reverse grid - most points starting last, least points on pole = recipe for disaster.
Another big battle with the Skyline, exchanged a couple of smudges again and came out on top again, last lap i got tagged by a new driver in 17g V6MazdaEunos taking a wild lunge which had me weaving around a bit as the handling 'going away was worse this time with a few more laps in the race but i hung on and finished sixth ....again
Rubs Wild lunge - Hit A bit gutted at having to break out hammer/dolly/welder/paint to fix someone elses mistake but thats speedway and at the end of the night when i just drove the car onto the trailer all in all it was a successful first outing when i compare it to some past opening meetings and the resultant carnage.
The grid draw was definitely not in my favour, lost a few spots and passed a few cars. I had an epic battle for several laps with the Skyline, the car was pretty good for most of the race but started 'going away' from me towards the end, squirming around and sliding more, tyre pressure adjustments should help but i really need a couple of new tyres. Finished sixth
Feature: Grid 6;
Reverse grid - most points starting last, least points on pole = recipe for disaster.
Another big battle with the Skyline, exchanged a couple of smudges again and came out on top again, last lap i got tagged by a new driver in 17g V6MazdaEunos taking a wild lunge which had me weaving around a bit as the handling 'going away was worse this time with a few more laps in the race but i hung on and finished sixth ....again
Rubs Wild lunge - Hit A bit gutted at having to break out hammer/dolly/welder/paint to fix someone elses mistake but thats speedway and at the end of the night when i just drove the car onto the trailer all in all it was a successful first outing when i compare it to some past opening meetings and the resultant carnage.
Build it, Race it, Break/Bend it ; Repeat.
- Holden202T
- Posts: 10394
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: VN Production Saloon
if you still had the old car you wouldn't have been hit once 

No matter what the question is, the answer is always more horsepower! 
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread

Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
-
- Posts: 345
- Joined: Sun Apr 05, 2009 1:07 pm
- cars: VN V6 Production Saloon
- Location: Gisborne NZ
Re: VN Production Saloon
Holden202T wrote:if you still had the old car you wouldn't have been hit once


only getting hit once aint too bad,
the marks on the corners of the front bumper and the left front door are from close racing, the tyre mark on the door is fron the back edge of the right front of the skyline - beautiful considering we did laps side by side sometimes in traffic
Build it, Race it, Break/Bend it ; Repeat.