Ls1 Flash Tool - Proof of concept

[vn5000]

I have been working on this for a while now .
I have designed a cable and software that will :
Read full bin in bin format
Read cal in bin format
Write the calibration section direct from bin file

Only remaining issue to sort out is writing a full bin file so os can be changed ,just need to tweek the bootloader file a bit more when i get time .

No licences are required giving freedom to flash as many pcms as you wish

Watch this space.

[yoda69]

Nice work, look forward to the release.

[The1]

awesome, look forward to it.

[immortality]

Interesting indeed. May put a few noses out of joint with the software outfits that do require licences...

[Dylan]

Anyone making custom OS? There's one company doing it and aren't cheap they are marketing it as a replacement for Delco.

[vn5000]

Efilive and Hptuner both have custom o/systems for ls1 pcms ,they are only really needed if you plan to run mafless and still have both hi/lo octane spark maps operating, or if your wish to run a boosted setup.
If you run a std os mafless you will only have the lo octane spark map operating.

[antus]

thats true, but to get both maps going when mafless its just one simple patch in the right place.

[vn5000]

Where in the code does the patch need applying ,cal section or operating code section.

[Holden202T]

I'd say it would be in the operating code

[antus]

depends on the OS, but yes, in the operating system code.