VR and VS Memcal
-
bck2basic
- Posts: 58
- Joined: Wed Jul 17, 2013 9:42 am
- cars: VL calais
VR and VS Memcal
Hey, just wondering is there any difference in a vr and vs memcal, and if I bought a VS Clubsport auto memcal BWCS9976 with a 1F4160 knock board, and paid someone to put a VR Clubsport BFPM tune on it, will it work in my vr hsv ecu or will I need a vs ecu? And will I still be able to use the aldl cable with the computer? Thanks
-
Holden202T
- Posts: 10435
- Joined: Sat Feb 28, 2009 11:05 am
- Location: Tenambit, NSW
Re: VR and VS Memcal
I think it will work but you'll probably have to disable VATS
No matter what the question is, the answer is always more horsepower! 
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread

Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
-
The1
- Posts: 4852
- Joined: Mon Jan 04, 2010 12:23 am
Re: VR and VS Memcal
knock boards should be both v8 ones and should work the same. The eeproms size is smaller on VR to VS so bin will need to be stacked.
-
Jayme
- Posts: 2585
- Joined: Sat Feb 28, 2009 10:59 pm
- Location: North Coast, NSW
Re: VR and VS Memcal
the memcals are 100% exactly the same from VR to VS. both VR and VS manuals have 32k eprom and both autos have 64k eprom. as long as you load up a VR tune onto it, and plug it into your VR computer in a VR car, then you will be fine and the fact that it came from a VS will be irrelevant
-
The1
- Posts: 4852
- Joined: Mon Jan 04, 2010 12:23 am
Re: VR and VS Memcal
yeh but he's buying a memcal BWCS which is 64k and wants to put BFPM onto it which is 32k.
-
bck2basic
- Posts: 58
- Joined: Wed Jul 17, 2013 9:42 am
- cars: VL calais
Re: VR and VS Memcal
Ok but is that hard The1? Also what would I expect to pay for a genuine vs clubsport auto memcal?
-
Jayme
- Posts: 2585
- Joined: Sat Feb 28, 2009 10:59 pm
- Location: North Coast, NSW
Re: VR and VS Memcal
just trying to make it clear for others who are reading the thread in the future. to me, your post conveyed the idea that all VR memcals are smaller than all VS memcals, which is incorrect.
to the OP: you will have zero problems. it will behave like a factory memcal. whoever you pay to burn the new tune on it will be able to figure out they need to stack it, in order to load it onto the larger eprom of an auto. its very simple and no problem
to the OP: you will have zero problems. it will behave like a factory memcal. whoever you pay to burn the new tune on it will be able to figure out they need to stack it, in order to load it onto the larger eprom of an auto. its very simple and no problem
-
bck2basic
- Posts: 58
- Joined: Wed Jul 17, 2013 9:42 am
- cars: VL calais
Re: VR and VS Memcal
Ok, sorry, thanks.
How much would I expect to pay for a vs clubby memcal though?
How much would I expect to pay for a vs clubby memcal though?
-
Jayme
- Posts: 2585
- Joined: Sat Feb 28, 2009 10:59 pm
- Location: North Coast, NSW
Re: VR and VS Memcal
ive never bought one, but given they are rare, I would expect it to run into the hundreds. someone else might be able to give a closer estimate if they have bought one before.
-
yoda69
- Posts: 1226
- Joined: Sun Mar 15, 2009 12:20 am
- cars: 2004 VYII Acclaim Wagon V6 Auto LPG/Petrol
2004 VYII Berlina sedan V6 Auto
2005 VZ Monaro CV8 manual - Location: Geelong, VIC
Re: VR and VS Memcal
Looking on eBay you're looking at around the $200-250 mark.
Make sure it is a genuine one as there are some dodgy sellers selling reflashed chips with V6 knockboards that will give nothing but trouble.
Although this guy is known to be dodgy, this one looks legit:
http://www.ebay.com.au/itm/GENUINE-HSV- ... 3cd4d09a74
Make sure it is a genuine one as there are some dodgy sellers selling reflashed chips with V6 knockboards that will give nothing but trouble.
Although this guy is known to be dodgy, this one looks legit:
http://www.ebay.com.au/itm/GENUINE-HSV- ... 3cd4d09a74