Trigger points for CAS.

[VL400]

Yeah, either way you can use a 36 tooth wheel and mod it to suit which ever path you take for spark control.

[GH1176]

Just one question about the 6+1, I noticed that in one picture the sync pulse is 10• before and another picture is 10• after tdc is there a reason for the difference?

[festy]

Yes, one picture is backwards

[GH1176]

Which one is correct?

[Holden202T]

my missing tooth is before TDC mark so I assume you want to have the 10 degree mark before your first tooth.

[GH1176]

Thanks, I'll order the wheel next week and I think it's the same as yours. Might get two incase i stuff it up or I decide too change it too a setup like yours later down the track, the best I have have been able too find for the module is around $120 delivered.

[festy]

See http://pcmhacking.net/forums/viewtopic. ... t=20#p9230
Sync pulse is 70* after, so 10* after the next 60* reference pulse

[festy]

the best I have have been able too find for the module is around $120 delivered.

If you mean the 6+1 module, this one is about $80 delivered.

[GH1176]

See http://pcmhacking.net/forums/viewtopic. ... t=20#p9230
Sync pulse is 70* after, so 10* after the next 60* reference pulse

Thanks for that makes it real easy too work out now.

[GH1176]

So the after market versions of the Delco units are ok to use?