CAFA_TF wrote:ahhhhhhh thats horrible, i have pulled it with efi live but must be custom OS cos it can not read it, i may just have to buy WB O2s and retune it from scratch
post the pulled tune from efi and i'll see if i can open it.
if i can, i'll tell you what u need to do to open it in efi
Jayme wrote:got a dyno graph and some pics of your engine to share? 2 bar sensor is good for 1 bar of boost as atmospheric pressure is 1 bar from absolute zero, and 2 bar is 1 bar above atmospheric pressure... so it more than likely has a 2 or 3 bar sensor and custom o/s to suit.
AH thanks for all your help hay
all i do have dyno somewhere on paper before i put the 3.4 diff in, had 370 ish kw at the wheels and 1350 foot pounds in 2nd, not sure what that is at fly somewhere between 650 and 770 lol no idea
You do not have the required permissions to view the files attached to this post.
For some reason my version of 2.25 will open it so I should be able to write it with that & then read it with 2.24 & should work out if your not in a hurry for it.
