Ose 12p flex output

For discussion and distribution of custom code and hacks
Posts: 560
Joined: Mon Jul 11, 2016 6:29 am

Ose 12p flex output

Postby Wade » Sat May 27, 2017 4:55 pm

I'd like to use a flex output to activate the electronic kickdown function on a th400 auto. The way it functions normally is either through an accelerator pedal mounted switch or throttlebody mounted micro switch that's activated at wot. Can anyone confirm that I've actually set it properly. Will post the bin and xdf
Attachments
FLEX OUTPUT OSE12P V112 - 1,2 and 3 bar.xdf
(407.17 KiB) Downloaded 127 times
FLEX OUTPUT OSE $12P V112 BLCF V8.BIN
(32 KiB) Downloaded 149 times

User avatar
Posts: 9821
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW

Re: Ose 12p flex output

Postby Holden202T » Wed May 31, 2017 4:58 pm

the table layout looks ok, but I would check your flashtool settings, i'd set the tick box for digital on/off (relay) and run it through a relay that's powered from igniton for safety.

you might find you can even lower the tps % that it activates to improve response, ie. at lower revs kick down at 50-70% might be better and less aggressive.....

Posts: 560
Joined: Mon Jul 11, 2016 6:29 am

Re: Ose 12p flex output

Postby Wade » Wed May 31, 2017 10:46 pm

Thanks mate. I was thinking about playing with the table once it's set up.

User avatar
Posts: 9821
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW

Re: Ose 12p flex output

Postby Holden202T » Thu Jun 01, 2017 12:46 pm

yeah and that side of it is just trial and error and "nice to have" how you have it will pretty much mimic the old style kick down at least.

Return to Custom Code

Who is online

Users browsing this forum: No registered users and 1 guest