Ose 12p flex output

[Wade]

I'd like to use a flex output to activate the electronic kickdown function on a th400 auto. The way it functions normally is either through an accelerator pedal mounted switch or throttlebody mounted micro switch that's activated at wot. Can anyone confirm that I've actually set it properly. Will post the bin and xdf

[Holden202T]

the table layout looks ok, but I would check your flashtool settings, i'd set the tick box for digital on/off (relay) and run it through a relay that's powered from igniton for safety.

you might find you can even lower the tps % that it activates to improve response, ie. at lower revs kick down at 50-70% might be better and less aggressive.....

[Wade]

Thanks mate. I was thinking about playing with the table once it's set up.

[Holden202T]

yeah and that side of it is just trial and error and "nice to have" how you have it will pretty much mimic the old style kick down at least.