OSEPlugin for Tunerpro 5 v1.80
- antus
- Site Admin
- Posts: 8272
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: OSEPlugin for Tunerpro 5 v1.1.2
ok good idea, have done that.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
- vnsswithcam
- Posts: 79
- Joined: Sat Mar 20, 2010 1:20 pm
- cars: vt ss commodore
- Location: penrith n.s.w
Re: OSEPlugin for Tunerpro 5 v1.1.2
hi guys
just a quick question when i open up say my main spark advance table the rows where the rpm are on the left hand side are upside down??? like 400rpm is at the top and 9600rpm is down the bottom this is only happening in tp rt when i use the same bin and xdf in normal tp its all ok?? is this normal?
ive looked at the picture at the 1st post in this thread and 9600rpm is at the top?
cheers
just a quick question when i open up say my main spark advance table the rows where the rpm are on the left hand side are upside down??? like 400rpm is at the top and 9600rpm is down the bottom this is only happening in tp rt when i use the same bin and xdf in normal tp its all ok?? is this normal?
ive looked at the picture at the 1st post in this thread and 9600rpm is at the top?
cheers
one point twenty one jiggawatts!!!! great scott!!!
Re: OSEPlugin for Tunerpro 5 v1.1.2
Tools > Preferences > General > Reverse Rows
- vnsswithcam
- Posts: 79
- Joined: Sat Mar 20, 2010 1:20 pm
- cars: vt ss commodore
- Location: penrith n.s.w
Re: OSEPlugin for Tunerpro 5 v1.1.2
i was trying to find that box for ages?? ha ha ha im so dumb
cheers
cheers
one point twenty one jiggawatts!!!! great scott!!!
Re: OSEPlugin for Tunerpro 5 v1.1.2
has anybody else had a problem with applying large changes to say a fuel / timing map i found i can only do a six block change otherwise it does not send through or comes up with an error?
Re: OSEPlugin for Tunerpro 5 v1.1.2
I have that exact problem but only with one of the VR auto RT bins. I havent been back to the car to get some debug logs for ant to fix it tho.
http://technet.microsoft.com/en-us/sysi ... 96647.aspx
take a log with that while the problem is occuring, and send it thru, it will help figure out where hte problem lies in the code.
http://technet.microsoft.com/en-us/sysi ... 96647.aspx
take a log with that while the problem is occuring, and send it thru, it will help figure out where hte problem lies in the code.
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: OSEPlugin for Tunerpro 5 v1.1.2
Its a known issue and should be resolved in the next release of the plugin. Its due to the different size buffers of different PCM models and code bases.
Re: OSEPlugin for Tunerpro 5 v1.1.2
sweet no problem it was happening when i was tuning a friends car so i dont have access to it at the moment it was a vr v8 auto so that explains it then. cheers guys
- antus
- Site Admin
- Posts: 8272
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: OSEPlugin for Tunerpro 5 v1.1.2
Well, I lost the hard disk on my main development machine over the weekend. The plugin code is safe, but i've lost the development environment. Also the latest TP5 (5.00.7004.00) has some plugin API changes so plugin v1.1.2 will not work with it. Hang tight, i'll get set up again as soon as possible as catch up!
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: OSEPlugin for Tunerpro 5 v1.1.2
i am trying to connect to my vt v6 s/c using the cxwk live tune bin but tp5 will not pick up the nvram as attached hardware any ideas?