VS-VY Enhanced Factory Bins

[VTXU8]

Is there an enhanced factory code for VT5L Manual?

[The1]

there isn't no, but you can use the Auto one and change the flags. There is a factory nvram enabled manual bin if you dont require enhanced features but you want to realtime tune.

viewtopic.php?f=27&t=613

[immortality]

Hi Mate,

Is there any possibility you can add the spark correction for lean cruise table into the VX SC bin please?

[immortality]

I think I got it sorted, found the table in the VT xdf so I've copied it over and adjusted the hex address offset to suit.

[trexbreah]

when scaling a maf sensor how do you then scale the default fallback table/what tables do you change

when you unplug the maf sensor what tables dose the ecu fall back to determine cylair

[The1]

theres a default airflow table. You can log the current values via a history table and update the table values using the live data.

[L67PSI]

I didn't want to start a new thread. Here is my question can I extend the XDF file so I can increase rpm limit? Please see attached screenshot - Here I added rows 17 and 18 and gave them the same 400rpm increment. Or is this the wrong way to tackle this?
Thanks

[delcowizzid]

No you can't just change the xdf to add rows or colomns

[L67PSI]

Thanks for quick reply. So what are my options here?

[immortality]

In short, there is no simple answer unless you want to re-write the whole code.