Thanks for idea, I hadn't thought of tune selector. Ive used usb function to do both modes you can select tunerpro bridge or sd tune selector, can only run one or other not both at same timeMuncie wrote: Mon Nov 09, 2026 7:43 am Im aiming to have Wifi to laptop as well and this ESP32 has it but my intention is to just have the Dash fitted permanently in car as my gauges logging and map selector. When i want to tune will hook up over wifi and do it there with ESP32 providing the connection the dash and Onerom will have a single USB C connection between them.
The testing of non ALDL logging is going ok and indeed works but needs some bugs sorted out can indeed deliver far higher logging speeds but i need to not have everything going flat out i dont need battery voltage at 20hz for example so ALDL can just be for the car. Currently ALDL and Rom bus logging can run concurrently i think i need to get the timing better to address the stalling.
select tunerpro bridge and you connected wired or wireless to fire onerom, Via tuner pro rt on laptop
select sd tune selector and you can select up 64 tunes, Ive made it auto select fire 28a or c to 32a or b and it locks out 28pin bins in 32pin mode, vice versa
In 32pin mode u can up load cal only not hole tune so car can select map while still running, dont have to restart car. you have to keep to same os or it will lock tune out so you cant, over lap with another os cal file.
P-4 is set to moates normal DT mode there is no ALDL function