TUNING MAFS

[nigel o'eill]

IAM ONLY NEW TO THIS TUNING SIDE OF MAF TUNING.
IS THERE AN EASY WAY TO MAKE IT WORK.AND HOW IS THE BEST WAY TO MAKE IT
HAPPEN

[The1]

Hit the FAQ button on the bar top right. Good place to start.

Also look at enhanced mod if your boosting will support larger MAF's and extended airflow range.
http://pcmhacking.net/forums/viewtopic.php?f=27&t=2518

Also CAPS on the internet is considered shouting

[nigel o'eill]

THANKS MATE
I hade a look there and there is one there.
vt v8 one .
will it work on the nvram board
put it in place of the drrr bin.

[nigel o'eill]

looking for the main spark over 4800 .trying to work out how it works and were to find it

[The1]

what xdf you using, it's usually labeled [Extension]

[nigel o'eill]

All of them in each different xdf
$83
$A6
$11

[VX L67 Getrag]

You need to read through all the well documented info on this site & FAQ's & there's some really good help guides!

You need to use the XDF to read whichever base tune you have identified as using so if it's $A6 (or different obviously for different codes!) you need that XDF to mod bin & same coded ADX to log the driveline!