I have a few e67s with jacked up virtual eeproms, other than J tag can if easily be fixed?
Takes me two hours to J-tag a e67 at 60 an hour I can also buy another used one for that price!
From j tag experience it’s definitely only a section of the main chip. Should just be a simple for loop, or are we not aloud to write to it from its own running OS?
E67 virtual eeprom repair
-
04colyZQ8
- Posts: 536
- Joined: Thu Jan 16, 2014 2:41 am
- cars: 2004 Colorado 4.8L swap
86/90 Jimmy 6.5L diesel swap
80 Chevrolet Silverado TBI swap
88dodge W100 LPG conversion
-
roughneck427
- Posts: 58
- Joined: Thu Feb 07, 2013 3:49 am
- cars: 2002 Camaro
2008 Pontiac G8
Re: E67 virtual eeprom repair
It should take 30 min to make a Jtag connection with the proper tools.
-
Tazzi
- Posts: 3627
- Joined: Thu May 17, 2012 10:53 am
- cars: VE SS Ute
- Location: WA
Re: E67 virtual eeprom repair
Roughneck is spot on.roughneck427 wrote: Mon Feb 19, 2024 3:53 am It should take 30 min to make a Jtag connection with the proper tools.
If you have a diagram, and use something like PCbites for the connection, it takes 10-15min to take off a cover, 5minutes to place the probes… 2minutes to read then write a replacement.. then a few minutes to add new sealant plus screw down the lid.
In saying that. I just leave ecus on my bench to find the unlock codes. I’m never in a rush so it doesn’t matter. Only bdm to fix a bricked unit.
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726

Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
